Tudóstér: Husi Géza publikációi

PDF
-
szűkítés
feltöltött közlemény: 309 Open Access: 112
2024
  1. Saadah, A., Medlin, D., Saud, J., Zheng, X., Husi, G.: A State-of-the-Art Design: Applying Forward Kinematics to Improve Patient Positioning in Radiosurgery.
    In: 2023 International Conference on Microelectronics (ICM) ISBN: 9798350380828
  2. Saadah, A., Medlin, D., Saud, J., Menyhárt, L., Zheng, X., Husi, G.: Developing Robust Safety Protocols for Radiosurgery within Patient Positioning System Framework.
    Machines. 12 1-21, 2024.
    Folyóirat-mutatók:
    Q2 Computer Science (miscellaneous) (2022)
    Q3 Control and Optimization (2022)
    Q2 Control and Systems Engineering (2022)
    Q2 Electrical and Electronic Engineering (2022)
    Q2 Industrial and Manufacturing Engineering (2022)
    Q2 Mechanical Engineering (2022)
2023
  1. Erdei, T., Nusser, D., Husi, G.: Cyber-physical recreation of six DOF industrial robot arm.
    Int. rev. appl. sci. eng. Online first 1-14, 2023.
    Folyóirat-mutatók:
    Q2 Architecture (2022)
    Q3 Engineering (miscellaneous) (2022)
    Q3 Environmental Engineering (2022)
    Q4 Information Systems (2022)
    Q4 Management Science and Operations Research (2022)
    Q3 Materials Science (miscellaneous) (2022)
  2. Kovács, B., Husi, G.: Ipar 4.0 szemléletű tesztelés és validálás kialakításának hatásaiaz elektronikai gyártásban.
    Régiókut. szle. 8 (1), 21-29, 2023.
  3. Saadah, A., Medlin, D., Saud, J., Zheng, X., Husi, G.: Kinematics Study for Linkage System (Parallel Robotics System): linkage system of patient positioning system PPS to accurately position a human body for radiosurgery treatment.
    In: Advances in Science and Engineering Technology International Conferences (ASET)
  4. Saadah, A., Husi, G., Al, K.: KUKA arc KR5 Industrial Manipulator's Trajectory Planning Modelling using MATLAB Based on Kinematics Study.
    In: Advances in Science and Engineering Technology International Conferences (ASET)
  5. Diós, S., Asztalos, G., Husi, G.: KUKA KR3 Industrial Robot Unit HMI Design and Control with Universal Industrial PC in Sipy Development Environment.
    MTK. 19 14-21, 2023.
  6. Diós, S., Asztalos, G., Husi, G.: KUKA KR3 ipari robotegység HMI-tervezése és vezérlése univerzális ipari PC-n Sipy fejlesztőplatform segítségével.
    Műsz. Tud. Közl. 19 14-21, 2023.
  7. Masuk, A., Husi, G.: Uses of aero graphene and CNT in modern aircraft.
    AIP Conf. Proc. 2941 1-9, 2023.
2022
  1. Erdei, T., Krakó, R., Nusser, D., Husi, G.: 3D CAD design of KUKA robot arm & integration into AR environment to educational purposes.
    In: 2022 IEEE 20th International Power Electronics and Motion Control Conference (PEMC) /, IEEE, New York, 590-596, 2022. ISBN: 9781665496810
  2. Tiba, Z., Győri, G., Ailer, P., Husi, G.: A Cessna 172 típusú repülőgép dízelüzemmódra alakításának megtérülése.
    Repüléstudományi Közlemények 34 (2), 5-17, 2022.
  3. Masuk, A., Husi, G.: Aero Graphene in Modern Aircraft & UAV.
    Recent Innov. Mechatron. 9 (1), 1-5, 2022.
  4. Kapusi, T., Erdei, T., Husi, G., Hajdu, A.: Application of Deep Learning in the Deployment of an Industrial SCARA Machine for Real-Time Object Detection.
    Robotics. 11 (4), 1-20, 2022.
    Folyóirat-mutatók:
    Q2 Artificial Intelligence
    Q1 Control and Optimization
    Q1 Mechanical Engineering
  5. Babangida, A., Husi, G., Szemes, P.: Bond Graph Modeling, Simulation, and Control of Permanent Magnet Linear Synchronous Motor: PMLSM Motor Based EVs Applications.
    Recent Innov. Mechatron. 9 (1), 1-9, 2022.
  6. Csernátony, Z., Manó, S., Tiba, Z., Husi, G., Jónás, Z., Váradi, T., Csámer, L., Kovács, Á.: Critical analysis of in vitro stability testing of spinal implants and proposal for standardization.
    Expert Rev. Med. Devices. 19 (3), 281-286, 2022.
    Folyóirat-mutatók:
    Q2 Biomedical Engineering
    Q2 Medicine (miscellaneous)
    Q2 Surgery
  7. Erdei, T., Krakó, R., Husi, G.: Design of a digital twin training centre for an industrial robot arm.
    Appl. Sci.-Basel. 12 (17), 1-25, 2022.
    Folyóirat-mutatók:
    Q3 Computer Science Applications
    Q2 Engineering (miscellaneous)
    Q2 Fluid Flow and Transfer Processes
    Q2 Instrumentation
    Q2 Materials Science (miscellaneous)
    Q3 Process Chemistry and Technology
  8. Tóth, S., Erdei, T., Husi, G.: Kollaboratív robot és ipari számítógép kommunikációs lehetőségeinek vizsgálata.
    Műsz. Tud. Közl. 17 60-64, 2022.
  9. Korsoveczki, G., Pál, P., Husi, G.: PID-szabályozóval ellátott robothajtás szimulációja Bond-gráf-modell alapján.
    Műsz. Tud. Közl. 17 37-41, 2022.
  10. Bodzás, S., Tiba, Z., Ailer, P., Husi, G.: Redesign of a Volkswagen Crafter vehicle to a hybrid vehicle having e-motor and diesel engine.
    IOP Conf. Ser. Mater. Sci. Eng. 1237 (1), 1-6, 2022.
  11. Almusawi, H., Mohammed, A., Khaled, A., Korondi, P., Husi, G.: Self-Driving robotic car utilizing image processing and machine learning.
    IOP Conf. Ser. Mater. Sci. Eng. 1256 1-13, 2022.
  12. Tóth, S., Erdei, T., Husi, G.: Studying the Communication Possibilities Between a Collaborative Robot and an Industrial Computer.
    Műsz. Tud. Közl. 17 60-64, 2022.
  13. Korsoveczki, G., Pál, P., Husi, G.: The Simulation of a Pid Controlled Robotic Drive Based on Bond Graph Modelling.
    SMűsz. Tud. Közl. 17 (1), 37-41, 2022.
2021
  1. Korsoveczki, G., Bencsik, B., Husi, G.: CPVC-könyökidomok optikai ellenőrzése és a gyártási folyamat hibadiagnosztikája.
    Műsz. tud. közl. = PTS. 15 56-60, 2021.
  2. Almusawi, H., Husi, G.: Design and Development of Continuous Passive Motion (CPM) for Fingers and Wrist Grounded-Exoskeleton Rehabilitation System.
    Appl. Sci.-Basel. 11 (2), 1-23, 2021.
    Folyóirat-mutatók:
    Q3 Computer Science Applications
    Q2 Engineering (miscellaneous)
    Q2 Fluid Flow and Transfer Processes
    Q2 Instrumentation
    Q2 Materials Science (miscellaneous)
    Q2 Process Chemistry and Technology
  3. Török, M., Erdei, T., Tóth, S., Husi, G.: Designing and building a remote-controlled 3D printed prototype robot arm implant.
    IOP Conf. Ser. Mater. Sci. Eng. 1169 (1), 1-6, 2021.
  4. Dezső, D., Győri, G., Husi, G.: Development of ECG measurement and processing system in LabVIEW environment.
    Int. rev. appl. sci. eng. 12 (1), 76-85, 2021.
    Folyóirat-mutatók:
    Q3 Engineering (miscellaneous)
    Q4 Environmental Engineering
    Q4 Information Systems
    Q4 Management Science and Operations Research
    Q4 Materials Science (miscellaneous)
  5. Saadah, A., Husi, G.: Hat szabadságfokos robotkarprototípus-modellezés Matlab által.
    Műsz. tud. közl. = PTS. 15 94-98, 2021.
  6. Saadah, A., Husi, G.: Kuka KR5 arc Welding Industrial Manipulator Workspace Modelling Based on Kinematics Study.
    IOP Conf. Ser. Mater. Sci. Eng. 1169 1-7, 2021.
  7. Józsa, R., Kapusi, T., Tóth, S., Erdei, T., Husi, G.: MP-9S Industrial Manipulator Handling and Scrapping Tasks in Industrial Environments.
    Műsz. tud. közl. = PTS. 15 (1), 38-42, 2021.
  8. Józsa, R., Kapusi, T., Tóth, S., Erdei, T., Husi, G.: MP-9S ipari manipulátor anyagmozgatási és selejtezési feladatok ellátása ipari környezetben.
    Műsz. tud. közl. = PTS. 15 38-42, 2021.
  9. Korsoveczki, G., Bencsik, B., Husi, G.: Optical Inspection of CPVC Fitting Elbows and Fault Diagnosis of the Production Process.
    Műsz. tud. közl. = PTS. 15 (1), 56-60, 2021.
  10. Saadah, A., Husi, G.: Six DOF Robotic Arm Prototype Modelling By Matlab.
    Műsz. tud. közl. = PTS. 15 (1), 94-98, 2021.
  11. Korsoveczki, G., Husi, G.: The model of a permanent magnet DC motor in time domain and frequency domain based on Bond Graph modelling and design of position control using PID controller.
    IOP Conf. Ser. Mater. Sci. Eng. 1169 1-5, 2021.
2020
  1. Dursun, C., Erdei, T., Husi, G.: Artificial Intelligence Applications in Autonomous Vehicles: Training Algorithm for Traffic Signs Recognition.
    IOP Conf. Ser. Mater. Sci. Eng. 8982020.
  2. Molnár, Z., Husi, G.: Bond-Graph model based stepper motor output characteristics simulation implemented in LabVIEW environment.
    Recent Innov. Mechatron. 7 (1), 2020.
  3. Saadah, A., Almusawi, H., Husi, G.: Computing The Kinematics Study of a 6 DOF Industrial Manipulator Prototype by Matlab.
    Recent Innov. Mechatron. 7 (1), 1-5, 2020.
  4. Faragó, I., Zolnai, S., Erdei, T., Husi, G.: Design of an IoT Smart Meteorological Station Complete with Data Acquisition and Realizing Test Measurements in Cyber-Physical Robotics Lab.
    Műsz. tud. közl. = PTS. 13 (1), 54-58, 2020.
  5. Hrámcov, I., Décsei, R., Erdei, T., Husi, G.: Design of Electron Tube and Semiconductor-Based and Voltage Stabilised Amplifier Circuits.
    Műsz. tud. közl. = PTS. 13 (1), 81-85, 2020.
  6. Hrámcov, I., Erdei, T., Husi, G.: Elektroncsöves és félvezetős feszültségstabilizált erősítő áramkörök kivitelezése.
    Műsz. tud. közl. = PTS. 13 81-85, 2020.
  7. Molnár, Z., Husi, G.: Flexible control and monitoring system design initiative based on Industry 4.0 principles.
    In: SIMS 2020 3rd International Symposium on Small-scale Intelligent Manufacturing Systems : 10-12 June 2020 : Norwegian University of Science and Technology, Gjovik, Norway, IEEE, [Gjovik], 1-6, 2020. ISBN: 9781728164199
  8. Faragó, I., Zolnai, S., Erdei, T., Husi, G.: IoT alapú Smart Meteorológiai állomás adatgyűjtő rendszerének tervezése és mérések elvégzése kiber-fizikai robotlaborban = Design of an IoT Smart meterological station complete with data acquisition and realizing test measurerments in cyber-physical robotics lab.
    Műsz. tud. közl. = PTS. 13 54-58, 2020.
  9. Korsoveczki, G., Husi, G.: Material handling based on object recognition with the help of FANUC delta-parallel industrial robot.
    IOP Conf. Ser. Mater. Sci. Eng. 8982020.
  10. Korsoveczki, G., Husi, G.: Optical inspection of mounted printed circuit board using National Instruments software.
    Recent Innov. Mechatron. 7 (1), 1-6, 2020.
  11. Debreceni, A., Erdei, T., Tóth, S., Erdei, T., Husi, G.: Reconstruction of a Grinding Machine Intended for Thermo-Polymers, and Design of a Linux Based Iot Control System.
    Műsz. tud. közl. = PTS. 13 (1), 45-49, 2020.
  12. Chauhan, R., Husi, G., Erdei, T.: ROS OS based environment mapping of Cyber Physical System Lab by Depth sensor.
    Recent Innov. Mechatron. 7 (1), 1-6, 2020.
  13. Erdei, T., Husi, G.: Singularity measurement in the Cyber-physical and intelligent robot systems laboratory.
    Int. Rev. Appl. Sci. Eng. 11 (2), 82-87, 2020.
    Folyóirat-mutatók:
    Q3 Engineering (miscellaneous)
    Q4 Environmental Engineering
    Q4 Information Systems
    Q4 Management Science and Operations Research
    Q4 Materials Science (miscellaneous)
  14. Debreceni, A., Tóth, S., Erdei, T., Husi, G.: Termopolimer darálóegység rekonstrukciója és IOT-irányítástechnikai rendszer tervezése Linux-alapon.
    Műsz. tud. közl. = PTS. 13 45-49, 2020.
2019
  1. Apagyi, A., Szmolka, T., Husi, G.: A Debreceni Egyetem elektromos meghajtású virágkocsijának tervezése és megvalósítása.
    Műsz. tud. közl. = PTS. 11 19-22, 2019.
  2. Varga, R., Erdei, T., Husi, G.: CodeSys based HMI design and sensor upgrades for a PLC and Atmega2560 controlled industrial conveyor.
    Anale. Univ. Oradea. Fasc. Manag. Techn. Engin. 18 (28) (1), 250-255, 2019.
  3. Varga, R., Erdei, T., Husi, G.: CodeSys based HMI design and sensor upgrades for a PLC and Atmega2560 controlled industrial conveyor.
    In: IMT Oradea 2019 : Proceedings of the Annual Session of Scientific Papers Volume 18 (28). Ed.: Gavril Grebenisan, Alexandru-Viorel Pele, University of Oradea Publishing House, Oradea, 334-339, 2019. ISBN: 9786061015375
  4. Varga, R., Erdei, T., Husi, G.: CodeSys based HMI design and sensor upgrades for a PLC and Atmega2560 controlled industrial conveyor.
    IOP Conf. Ser. Mater. Sci. Eng. 5682019.
  5. Pajkos, T., Erdei, T., Husi, G.: CodeSys modeling of an industrial cell, and linear drive control with PLC & ATmega2560 microcontrollers for testing and improvement purposes.
    Anale. Univ. Oradea. Fasc. Manag. Techn. Engin. 18 (28) (1), 245-249, 2019.
  6. Pajkos, T., Erdei, T., Husi, G.: CodeSys modeling of an industrial cell, and linear drive control with PLC & ATmega2560 microcontrollers for testing and improvement purposes.
    In: IMT Oradea 2019 : Proceedings of the Annual Session of Scientific Papers Volume 18 (28). Ed.: Gavril Grebenisan, Alexandru-Viorel Pele, University of Oradea Publishing House, Oradea, 329-333, 2019. ISBN: 9786061015375
  7. Pajkos, T., Erdei, T., Husi, G.: CodeSys modeling of an industrial cell, and linear drive control with PLC & ATmega2560 microcontrollers for testing and improvement purposes.
    IOP Conf. Ser. Mater. Sci. Eng. 5682019.
  8. Pajkos, T., Erdei, T., Husi, G.: CodeSys modelling of an industrial cell, and linear drive control with PLC & ATmega2560 microcontrollers for testing and improvement purposes.
    IOP Conf. Ser. Mater. Sci. Eng. 5682019.
  9. Krucsó, L., Kapusi, T., Erdei, T., Husi, G.: Designing an ATmega328 microcontroller based gesture-controlled IoT UGV unit and creating a camera system using Linux distribution.
    Recent Innov. Mechatron. 6 (1), 1-7, 2019.
  10. Almusawi, H., Afghan, S., Husi, G.: Designing the Mechanical Parts of a Low-Cost Hand Rehabilitation CPM Device for Stroke Patients.
    In: Innovation, Engineering and Entrepreneurship. Eds.: José Machado, Filomena Soares, Germano Veiga, Springer, Cham, 60-66, 2019, (Lecture Notes in Electrical Engineering, ISSN 1876-1119 ; 505) ISBN: 9783319913346
  11. Molnár, Z., Cascio, G., Husi, G., Szűcs, E.: Developing a real-time accuracy monitoring system for industrial robot arms based on lean principles.
    Anale. Univ. Oradea. Fasc. Manag. Techn. Engin. 18 (28) (1), 277-281, 2019.
  12. Molnár, Z., Cascio, G., Husi, G., Szűcs, E.: Developing a real-time accuracy monitoring system for industrial robot arms based on lean principles.
    In: IMT Oradea 2019 : Proceedings of the Annual Session of Scientific Papers Volume 18 (28). Ed.: Gavril Grebenisan, Alexandru-Viorel Pele, University of Oradea Publishing House, Oradea, 366-370, 2019. ISBN: 9786061015375
  13. Molnár, Z., Cascio, G., Szűcs, E., Husi, G.: Developing a real-time accuracy monitoring system for industrial robot arms based on lean principles.
    IOP Conf. Ser. Mater. Sci. Eng. 5682019.
  14. Korsoveczki, G., Husi, G., Erdei, T.: Development and Testing of the Pneumatic and Output System of the FANUC Spider Robot.
    Műszaki tud. közl. = PTS. 11 (1), 121-124, 2019.
  15. Füleki, Z., Erdei, T., Szántó, A., Szíki, G., Husi, G.: Development of an IoT based Smart meteorological station & horticultural irrigation system's controller using a Raspberry Pi Linux server.
    Recent Innov. Mechatron. 6 (1), 1-6, 2019.
  16. Korsoveczki, G., Erdei, T., Husi, G.: FANUC Spider robot pneumatikus és kimeneti rendszerének kiépítése, valamint tesztelése = development and testing of the pneumatic and output system of the Fanuc spider robot.
    Műsz. tud. közl. = PTS. 11 121-124, 2019.
  17. Apagyi, A., Szmolka, T., Bartha, I., Vitéz, A., Husi, G.: Inverter powered steer-by-wire system in flower carnival car of University of Debrecen.
    MATEC Web Conf. [Epub] 1-5, 2019.
  18. Afghan, S., Husi, G.: Modelling and Analysis of Energy Harvesting in Internet of Things (IoT): Characterization of a Thermal Energy Harvesting Circuit for IoT based Applications with LTC3108.
    Energies. 12 (20), 1-13, 2019.
    Folyóirat-mutatók:
    Q2 Control and Optimization
    Q2 Electrical and Electronic Engineering
    Q2 Energy Engineering and Power Technology
    Q2 Energy (miscellaneous)
    Q2 Fuel Technology
    Q2 Renewable Energy, Sustainability and the Environment
  19. Vona, G., Apagyi, A., Erdei, T., Husi, G.: Nokia Puma 560 robot megfogójának rekonstrukciója, adapter tervezése és alkalmazása KUKA KR5 ipari robotkar számára tervezett cellában.
    Műsz. tud. közl. = PTS. 11 183-186, 2019.
  20. Apagyi, A., Szmolka, T., Husi, G.: Planning and building electric of an flower carnival car at University of Debrecen.
    Műszaki tud. közl. 11 19-22, 2019.
  21. Alsabbagh, A., Nasser, A., Husi, G.: Python-Based Data Analysis Tool for a 6-DoF Industrial Robot.
    Anale. Univ. Oradea. Fasc. Manag. Techn. Engin. 18 (28) (1), 411-418, 2019.
  22. Alsabbagh, A., Nasser, A., Husi, G.: Python-Based Data Analysis Tool for a 6-DoF Industrial Robot.
    In: IMT Oradea 2019 : Proceedings of the Annual Session of Scientific Papers Volume 18 (28). Ed.: Gavril Grebenisan, Alexandru-Viorel Pele, University of Oradea Publishing House, Oradea, 530-537, 2019. ISBN: 9786061015375
  23. Alsabbagh, A., Nasser, A., Husi, G.: Python-Based Data Analysis Tool for a 6-DoF Industrial Robot.
    IOP Conf. Ser. Mater. Sci. Eng. 5682019.
  24. Vona, G., Apagyi, A., Husi, G., Erdei, T.: Reconstruction, Adapter Design and Application of a Nokia Puma 560 Robot's Gripper on a Robot Cell Integrated KUKA KR5 Industrial Robot.
    Műszaki tud. közl = PTS. 11 183-186, 2019.
  25. Horváth, P., Erdei, T., Husi, G.: Restoration and PLC control of a material handling MP-9S industrial manipulator platform.
    Anale. Univ. Oradea. Fasc. Manag. Techn. Engin. 18 (28) (1), 240-244, 2019.
  26. Horváth, P., Erdei, T., Husi, G.: Restoration and PLC control of a material handling MP-9S industrial manipulator platform.
    In: IMT Oradea 2019 : Proceedings of the Annual Session of Scientific Papers Volume 18 (28). Ed.: Gavril Grebenisan, Alexandru-Viorel Pele, University of Oradea Publishing House, Oradea, 324-328, 2019. ISBN: 9786061015375
  27. Horváth, P., Husi, G., Erdei, T.: Restoration and PLC control of a material handling MP-9S industrial manipulator platform.
    IOP Conf. Ser. Mater. Sci. Eng. 5682019.
  28. Hegyi, G., Erdei, T., Husi, G.: Restoration and PLC control of a robot cell compatible MP-11 industrial manipulator platform.
    IOP Conf. Ser. Mater. Sci. Eng. 5682019.
  29. Hegyi, G., Erdei, T., Husi, G.: Restoration and PLC control of a robot cell compatible MP-11 industrial manipulator platform.
    Anale. Univ. Oradea. Fasc. Manag. Techn. Engin. 18 (28) (1), 235-239, 2019.
  30. Hegyi, G., Erdei, T., Husi, G.: Restoration and PLC control of a robot cell compatible MP-11 industrial manipulator platform.
    In: IMT Oradea 2019 : Proceedings of the Annual Session of Scientific Papers Volume 18 (28). Ed.: Gavril Grebenisan, Alexandru-Viorel Pele, University of Oradea Publishing House, Oradea, 319-323, 2019. ISBN: 9786061015375
  31. Hegyi, G., Husi, G., Erdei, T.: Restoration and PLC control of a robot cell compatible MP-11 industrial manipulator platform.
    IOP Conf. Ser. Mater. Sci. Eng. 5682019.
  32. Afghan, S., Almusawi, H., Husi, G.: Simulating the Electrical Characteristics of Solar Panels based on Practical Single-Diode Equivalent Circuit Model: Analyzing the Influence of Environmental Parameters on Output Power.
    In: Innovation, Engineering and Entrepreneurship. Eds.: José Machado, Filomena Soares, Germano Veiga, Springer, Cham, 67-74, 2019, (Lecture Notes in Electrical Engineering, ISSN 1876-1119 ; 505.) ISBN: 9783319913346
  33. Nasser, A., Alsabbagh, A., Husi, G.: The effect of changing training data on a fixed deep learning detection model.
    Anale. Univ. Oradea. Fasc. Manag. Techn. Engin. 18 (28) (1), 362-372, 2019.
  34. Nasser, A., Alsabbagh, A., Husi, G.: The effect of changing training data on a fixed deep learning detection model.
    In: IMT Oradea 2019 : Proceedings of the Annual Session of Scientific Papers Volume 18 (28). Ed.: Gavril Grebenisan, Alexandru-Viorel Pele, University of Oradea Publishing House, Oradea, 472-477, 2019. ISBN: 9786061015375
  35. Nasser, A., Alsabbagh, A., Husi, G.: The effect of changing training data on a fixed deep learning detection model.
    IOP Conf. Ser. Mater. Sci. Eng. 5682019.
2018
  1. Erdei, T., Molnár, Z., Obinna, N., Husi, G.: A novel design of an augmented reality based navigation system & its industrial applications.
    Acta IMEKO. 7 (1), 57-62, 2018.
    Folyóirat-mutatók:
    Q3 Electrical and Electronic Engineering
    Q3 Instrumentation
    Q3 Mechanical Engineering
  2. Torma, D., Husi, G., Sarvajcz, K.: Autódiagnosztikai adatok feldolgozása NI DIAdem programmal.
    RIIM. 5 (SI.), 1-7, 2018.
  3. Karadeniz, A., Alsabbagh, A., Husi, G.: Comparison between proportional, integral, derivative controller and fuzzy logic approaches on controlling quarter car suspension system.
    MATEC Web Conf. 184 (Paper), [4], 2018.
  4. Karadeniz, A., Alsabbagh, A., Husi, G.: Comparison of Proportional, Integral, Derivate and Fuzzy Logic Approaches on Controlling Quarter Car Suspension System.
    In: "Imt Oradea" - 2018 : Proceedings of the Annual Seesion of Scientific Papers, University of Oradea Publishing House, Oradea, 301-304, 2018. ISBN: 9786061015375
  5. Bánóczy, E., Szemes, P., Husi, G.: Computer-aided opportunities in modernization of residential buildings.
    In: 2nd International Symposium on Small-scale Intelligent Manufacturing Systems (SIMS), 2018, IEEE, [s.l.], 1-6, 2018. ISBN: 9781538644379
  6. Templom, T., Erdei, T., Husi, G.: Delta tripod robot FDM típusú 3D nyomtató tervezése Open-Source Arduino fejlesztőplatform felhasználásával.
    RIIM. 5 (SI.), 1-6, 2018.
  7. Templom, T., Erdei, T., Shaw, E., Husi, G., Molnár, Z.: Designing a delta tripod robot based fused deposition modelling 3 dimensional printer using an open-source Arduino development platform.
    MATEC Web Conf. 184 1-4, 2018.
  8. Templom, T., Molnár, Z., Shaw, E., Husi, G., Erdei, T.: Designing a Delta Tripod Robot Based Fused Deposition Modelling 3 Dimensional Printer Using an Open-Source Arduino Development Platform.
    Anale. Univ. Oradea = Fasc. Manag. Techn. Engin. 17 (27) (2), 89-92, 2018.
  9. Templom, T., Molnár, Z., Shaw, E., Erdei, T., Husi, G.: Designing a delta tripod robot based fused deposition modelling 3 dimensional printer using an open-source Arduino development platform.
    In: "Imt Oradea" - 2018 : Proceedings of the Annual Seesion of Scientific Papers, University of Oradea Publishing House, Oradea, 179-182, 2018. ISBN: 9786061015375
  10. Dezső, D., Sarvajcz, K., Husi, G.: Drónok szabályzásainak vizsgálata képfeldolgozással.
    RIIM. 5 (SI.), 1-6, 2018.
  11. Molnár, Z., Erdei, T., Husi, G.: Egyedi tervezésű légpárnás jármű alapanyag kiválasztása és tesztek elvégzése = Custom-Designed Hovercraft Material Selection and Testing.
    Villamosmérn. tud. 1 (1), 113-118, 2018.
  12. Agonás, Á., Bánóczy, E., Husi, G.: Épületekben használandó mérőműszer megvalósítása Arduino mikrokontrollerrel.
    RIIM. Különszám 1-7, 2018.
  13. Korsoveczki, G., Husi, G., Erdei, T.: FANUC M-1iA 0.5A válogató robot karbantartása, üzembe helyezése és iRVision alapú képfelismerés megvalósítása.
    RIIM. 5 (Klnsz.), 1-7, 2018.
  14. Balogh, I., Sarvajcz, K., Husi, G.: GPS adatok mérése és feldolgozása NI, LabVIEW szoftverrel.
    RIIM. 5 (SI.), 1-7, 2018.
  15. Tyukodi, Z., Husi, G., Bánóczy, E.: Grafikus felület készítése épületek energiafogyasztásának szimulációs vizsgálatához.
    RIIM. 5 (SI.), 1-7, 2018.
  16. Varga, V., Erdei, T., Husi, G.: KUKA KR5 ipari hegesztő robotkar megfogó rendszerének újratervezése 3D nyomtató technológia felhasználásával Arduino segítségével.
    RIIM. 5 (SI.), 1-7, 2018.
  17. Molnár, Z., Obinna, N., Husi, G., Erdei, T.: KUKA KR5 ipari robotkar szingularitásának vizsgálata.
    RIIM. Különszám 1-5, 2018.
  18. Murvai, D., Erdei, T., Husi, G.: Oktatási tesztpanel tervezése FANUC M1iA ipari válogató robot számára.
    RIIM. 5 (Különszám), 1-6, 2018.
  19. Nagy, D., Husi, G., Szemes, P.: Omnidirekcionális robot megvalósítása, dinamikai és mozgásszabályozási tulajdonságainak mérése.
    RIIM. Különszám 1-6, 2018.
  20. Nagy, Á., Tóth, J., Husi, G.: Pneumatikus megfogóval szerelt többtengelyes manipulátor irányítása PLC-vel.
    RIIM. 5 (SI.), 1-5, 2018.
  21. Almusawi, H., Afghan, S., Husi, G.: Recent trends in robotic systems for upper-limb stroke recovery: A low-cost hand and wrist rehabilitation device.
    In: 2nd International Symposium on Small-scale Intelligent Manufacturing Systems (SIMS), 2018, IEEE, Piscataway, 1-6, 2018. ISBN: 9781538644379
  22. Varga, V., Husi, G., Erdei, T.: Redesigning the gripping system of KUKA KR5 by utilizing 3 dimension printing technologies and Arduino.
    MATEC Web of Conferences 184 1-6, 2018.
  23. Varga, V., Erdei, T., Husi, G.: Redesigning The Gripping System Of Kuka Kr5 By Utilizing 3 Dimension Printing Technologies and Arduino.
    Anale. Univ. Oradea = Fasc. Manag. Techn. Engin. 17 (27) (2), 93-98, 2018.
  24. Varga, V., Husi, G., Erdei, T.: Redesigning The Gripping System Of Kuka Kr5 By Utilizing 3 Dimension Printing Technologies and Arduino.
    In: "Imt Oradea" - 2018 : Proceedings of the Annual Seesion of Scientific Papers, University of Oradea Publishing House, Oradea, 183-188, 2018. ISBN: 9786061015375
  25. Szabó, A., Husi, G., Szemes, P.: Robosztus objektumfelismerés mobil robotokhoz, Kinect szenzor segítségével.
    RIIM. 5 (SI.), 1-6, 2018.
  26. Vinnai, B., Erdei, T., Husi, G.: Robot cellába illeszthető ATmega2560 mikrokontroller vezérelt tesztpanel tervezése & készítése oktatási céllal.
    RIIM. 5 (Különszám), 1-6, 2018.
  27. Korsoveczki, G., Husi, G., Erdei, T.: The maintenance, commissioning of FANUC M-1iA 0.5A type selecting robot and implementation of iRVision picture-recognizing procedure.
    MATEC Web Conf. 184 1-6, 2018.
  28. Korsoveczki, G., Husi, G., Erdei, T.: The Maintenance, Commissioning of FANUC M-1iA 0.5a Type Selecting Robot and Implementation of Irvision Picture-Recognizing Procedure.
    Anale. Univ. Oradea = Fasc. Manag. Techn. Engin. 17 (27) (2), 69-74, 2018.
  29. Korsoveczki, G., Husi, G., Erdei, T.: The Maintenance, Commissioning of FANUC M-1IA 0.5A Type Selecting Robot and Implementation of Irvision Picture-Recognizing Procedure.
    In: "Imt Oradea" - 2018 : Proceedings of the Annual Seesion of Scientific Papers, University of Oradea Publishing House, Oradea, 159-164, 2018. ISBN: 9786061015375
  30. Afghan, S., Almusawi, H., Husi, G.: Towards the self-powered Internet of Things (IoT) by energy harvesting: Trends and technologies for green IoT.
    In: 2018 2nd International Symposium on Small-scale Intelligent Manufacturing Systems (SIMS), IEEE, Piscataway, 1-5, 2018. ISBN: 9781538644379
2017
  1. Costea, C., Gergely, E., Coroiu, L., Silaghi, H., Bara, A., Husi, G.: A Control Design Technique for Grinding Systems with Feedforward Undercompensation and Feedback Control.
    SBEEF. 17 (1), 1-5, 2017.
  2. Erdei, T., Molnár, Z., Obinna, N., Husi, G.: AGV kiber-fizikai navigációs rendszer = Cyber-Physical Navigation System of AGV.
    In: A XXII. Fiatal Műszakiak Tudományos Ülésszak előadásai = Proceedings of the XXII-th International Scientific Conference of Young Engineers. Szerk.: Bitay Enikő, Erdélyi Múzeum Egyesület (EME), Kolozsvár, 135-138, 2017. ISBN: 9789634490180
  3. Molnár, Z., Erdei, T., Obinna, N., Husi, G.: A Novel Design of an Air-Cushion Vehicle and Its Implementation.
    In: "Imt Oradea" - 2017: Proceedings of the Annual Seesion of Scientific Papers. Ed.: Calin Baban, Florin Sandu Blaga, Gavril Grebenisan, Alexandru-Viorel Pele, Mircea Teodor Pop, Alexandru Rus, Radu Catalin Tarca, University of Oradea Publishing House, Oradea, 187-190, 2017. ISBN: 9786061015375
  4. Molnár, Z., Erdei, T., Obinna, N., Husi, G.: A Novel Design of an Air-Cushion Vehicle and Its Implementation.
    Anale. Univ. Oradea = Fasc. Manag. Techn. Engin. 16 (26) (2), 105-108, 2017.
  5. Molnár, Z., Erdei, T., Obinna, N., Husi, G.: A novel design of an air-cushion vehicle and its implementation.
    MATEC Web Conf. 126 (Paper), [4], 2017.
  6. Erdei, T., Molnár, Z., Obinna, N., Husi, G.: A Novel Design of an Augmented Reality Based Navigation System & its Industrial Applications.
    In: 15th IMEKO TC10 Workshop on Technical Diagnostics Technical Diagnostics in Cyber-Physical Era, Budapest, Hungary, June 6-7, 2017, [s. n.], Budapest, 44-49, 2017. ISBN: 9789299007556
  7. Almusawi, H., Afghan, S., Husi, G., Molnár, Z., Erdei, T.: A stroke-t kapott egyének rehabilitációs eszközeiben jelentős fejlődést mutató hatékony technikák áttekintése = Reviewing the notable progress of effective techniques in the development of stroke hand rehabilitation devices.
    In: A XXII. Fiatal Műszakiak Tudományos Ülésszak előadásai = Proceedings of the XXII-th International Scientific Conference of Young Engineers. Szerk.: Bitay Enikő, Erdélyi Múzeum Egyesület, Kolozsvár, 63-66, 2017, (Műszaki Tudományos Közlemények, ISSN 2393-1280 ; 7.) ISBN: 9789634490180
  8. Erdei, T., Molnár, Z., Obinna, N., Husi, G.: Cyber Physical Systems In Mechatronic Research Centre.
    Anale. Univ. Oradea = Fasc. Manag. Techn. Engin. 16 (26) (2), 95-98, 2017.
  9. Erdei, T., Molnár, Z., Obinna, N., Husi, G.: Cyber physical systems in mechatronic research centre.
    MATEC Web Conf. 126 (Paper), [4], 2017.
  10. Erdei, T., Molnár, Z., Obinna, N., Husi, G.: Cyber Physical Systems In Mechatronic Research Centrex.
    In: "Imt Oradea" - 2017 : Proceedings of the Annual Seesion of Scientific Papers. Ed.: Calin Baban, Florin Sandu Blaga, Gavril Grebenisan, Alexandru-Viorel Pele, Mircea Teodor Pop, Alexandru Rus, Radu Catalin Tarca, University of Oradea Publishing House, Oradea, 191-194, 2017. ISBN: 9786061015375
  11. Nagy, Z., Husi, G., Bánóczy, E.: Épületautomatizálási rendszer kiépítése Arduinoval és ESP8266 modullal.
    RIIM. 4 (SI.), 1-7, 2017.
  12. Szíki, G., Sarvajcz, K., Kiss, J., Gál, T., Szántó, A., Gábora, A., Husi, G.: Experimental investigation of a series wound dc motor for modeling purpose in electric vehicles and mechatronics systems.
    Measurement. 109 111-118, 2017.
    Folyóirat-mutatók:
    Q2 Applied Mathematics
    Q2 Condensed Matter Physics
    Q1 Education
    Q1 Electrical and Electronic Engineering
    Q1 Instrumentation
    Q2 Statistics and Probability
  13. Szabó, L., Husi, G., Tóth, J.: Ipari eszközökkel megvalósított automata elektropneumatikus rajzgép.
    RIIM. 4 (SI.), 1-6, 2017.
  14. Obinna, N., Erdei, T., Husi, G., Szemes, P., Molnár, Z.: LabVIEW alapú mozgás tervezése és nyomon követése ipari robot manipulátor számára (KUKA KR5 arc): tervezés, modellezés és robot vezérlőegység szimulációja = Labview Motion Planning and Tracking of an Industrial Robotic Manipulator (Kuka Kr5 Arc) : Design, Modelling and Simulating the Robot's Controller Unit.
    In: A XXII. Fiatal Műszakiak Tudományos Ülésszak előadásai = Proceedings of the XXII-th International Scientific Conference of Young Engineers. Szerk.: Bitay Enikő, Erdélyi Múzeum Egyesület (EME), Kolozsvár, 331-334, 2017. ISBN: 9789634490180
  15. Afghan, S., Almusawi, H., Husi, G.: Minimális kimeneti teljesítmény meghatározása energy harvesting prototípushoz: egy esettanulmány mobiltelefon specifikációkra = Approximating the minimum output power for energy harvesting prototype : a case study of cell phone specifications.
    In: A XXII. Fiatal Műszakiak Tudományos Ülésszak előadásai = Proceedings of the XXII-th International Scientific Conference of Young Engineers. Szerk.: Bitay Enikő, Erdélyi Múzeum Egyesület, Kolozsvár, 55-58, 2017, (Műszaki Tudományos Közlemények, ISSN 2393-1280 ; 7.) ISBN: 9789634490180
  16. Sas, D., Kövendi, Z., Coroiu, L., Gergely, E., Husi, G.: Modeling and simulation of a Carbon 13C Separation Process by low temperature Distilation.
    In: 14th International Conference on Engineering of Modern Electric Systems, IEEE, [s.l.], 208-211, 2017. ISBN: 9781509060740
  17. Afghan, S., Husi, G.: Modelling and Simulating Photovoltaic Energy Harvesting Circuit: an Analysis based on Trial and Error approximation for Optimal Output Power of a Harvester.
    In: 2017 International Conference on Engineering, Technology and Innovation (ICE/ITMC) : Conference Proceedings, IEEE, Piscataway, 504-508, 2017. ISBN: 9781538607749
  18. Ács, V., Husi, G., Tóth, J.: NI MYDAQ eszközzel támogatott ipari szenzor vizsgáló állomás modellezése.
    RIIM. 4 (Különszám), 1-5, 2017.
  19. Sas, D., Kovendi, Z., Gergely, E., Husi, G., Coroiu, L.: Preliminaries in carbon 13C separation process by low temperature distillation.
    J. Electr. Electron. Eng. 10 (1), 63-66, 2017.
    Folyóirat-mutatók:
    Q3 Electrical and Electronic Engineering
  20. Molnár, Z., Husi, G.: Prototípus alkatrészek elkészítésére kifejlesztett CNC távvezérlése és távfelügyelete.
    RIIM. 4 (Különszám), 2017.
  21. Molnár, Z., Erdei, T., Almusawi, H., Husi, G.: Saját CNC prototípus rendszer mint IoT eszköz = Our Own CNC Prototype System as IoT Device.
    In: A XXII. Fiatal Műszakiak Tudományos Ülésszak előadásai = Proceedings of the XXII-th International Scientific Conference of Young Engineers. Szerk.: Bitay Enikő, Erdélyi Múzeum Egyesület (EME), Kolozsvár, 295-298, 2017, (Műszaki Tudományos Közlemények, ISSN 2393-1280 ; 7.) ISBN: 9789634490180
  22. Afghan, S., Almusawi, H., Husi, G.: Simulating the electrical characteristics of a photovoltaic cell based on a single-diode equivalent circuit model.
    In: Proceedings of the Annual Session of Scientific Papers "Imt Oradea - 2017", 25th-27th May, Oradea, Romania. Eds.: Calin Baban, Florin Sandu Blaga, Gavril Grebenisan, Alexandru-Viorel Pele, Mircea Teodor Pop, Alexandru Rus, Radu Catalin Tarca, University of Oradea Publishing House, Oradea, 181-186, 2017. ISBN: 9786061015375
  23. Afghan, S., Almusawi, H., Husi, G.: Simulating the electrical characteristics of a photovoltaic cell based on a single-diode equivalent circuit model.
    Anal. Univ. Oradea. Fasc. Ing. Manag. Technol. 26 (1), 91-96, 2017.
  24. Afghan, S., Almusawi, H., Husi, G.: Simulating the electrical characteristics of a photovoltaic cell based on a single-diode equivalent circuit model.
    MATEC Web Conf. 126 1-6, 2017.
  25. Erdei, T., Obinna, N., Molnár, Z., Husi, G.: Surveillance and security system in the building mechatronics research center.
    In: 2017 International Conference on Engineering, Technology and Innovation (ICE/ITMC): Proceedings of the 23rd ICE/IEEE International Conference on Engineering Technology and Innovation (IEEE), IEEE, [s. l.], 509-512, 2017. ISBN: 9781538607749
2016
  1. Husi, G.: Bevezetés a CAD-CAM rendszerek alkalmazásába.
    Debreceni Egyetem, Debrecen, 51 p., 2016.
  2. Afghan, S., Almusawi, H., Jokhio, S., Husi, G.: Estimation of minimum output power threshold for energy harvesting module: an inspection of battery and charging parameters of cell phones.
    In: Proceedings of 4th International Mechatronical Student Micro-Conference. Eds.: Adrienn Dineva, István Nagy, Óbudai Egyetem, Budapest, 56-71, 2016. ISBN: 9789634490166
  3. Husi, G., Szemes, P.: Fogászati CAD-CAM rendszerek műszaki háttere.
    Debreceni Egyetem, Debrecen, 59 p., 2016.
  4. Liptai, T., Husi, G., Tóth, J.: Fúvós hangszer irányítása PROFINET ipari protokollon keresztül = Controlling a wind instrument with the help of PROFINET industrial protocol.
    IJEMS. 1 (2), 123-128, 2016.
  5. Costea, C., Silaghi, H., Matica, L., Gergely, E., Coroiu, L., Husi, G.: Graphical Interface Design for Water Pumping Process which Works with a Hydrophore.
    SBEEF. 16 1-5, 2016.
  6. Obinna, N., Erdei, T., Molnár, Z., Husi, G., Szemes, P.: Investigating configuration space singularities of a KUKA KR5.
    In: Proceedings of 4th International Mechatronical Student Micro-Conference. Eds.: Adrienn Dineva, István Nagy, Óbudai Egyetem, Budapest, 17-28, 2016. ISBN: 9789634490166
  7. Husi, G.: Ipar 4.0.
    Debreceni Egyetem Műszaki Kar, Debrecen, 43 p., 2016.
  8. Antal, D., Kiss, T., Szemes, P., Husi, G.: LabVIEW based DC motor dynamic load emulation testbed for testing rapid prototyping servo drives.
    In: 1st International Symposium on Small-scale Intelligent Manufacturing Systems (SIMS 2016), [s.n.], Narvik, 105-110, 2016.
  9. Husi, G., Szemes, P.: Rapid prototyping technológiák - additív technikák.
    Debreceni Egyetem, Debrecen, 55 p., 2016.
  10. Erdei, T., Molnár, Z., Husi, G.: Robot visual and virtual control technology in industrial environment.
    In: 1st International Symposium on Small-scale Intelligent Manufacturing Systems (SIMS 2016), IEEE, Narvik, 71-75, 2016. ISBN: 9781509030743
  11. Erdei, T., Molnár, Z., Husi, G.: Saját fejlesztésű vezérlőrendszer = Open-Source alapokon Self-developed controller system based on Open-Source applications.
    IJEMS. 1 (2), 97-105, 2016.
  12. Dragomir, G., Pancu, R., Georgescu, L., Beles, H., Husi, G.: Studies About Reflected Temperature Variation for the Car Brake Disc.
    Appl. Mech. Mater. 822 135-140, 2016.
    Folyóirat-mutatók:
    Q4 Engineering (miscellaneous)
  13. Almusawi, H., Afghan, S., Husi, G.: Technological advancements in stroke hand rehabilitation devices: a review.
    In: Proceedings of 4th International Mechatronical Student Micro-Conference. Eds.: Adrienn Dineva, István Nagy, Óbudai Egyetem, Budapest, 80-90, 2016. ISBN: 9789634490166
2015
  1. Csokmai, L., Tarca, R., Bungau, C., Husi, G.: A Comprehensive Approach to Off-line Advanced Error Troubleshooting in Intelligent Manufacturing Systems.
    Int. J. of Computers, Communications & Control. 10 (1), 30-37, 2015.
    Folyóirat-mutatók:
    Q4 Computational Theory and Mathematics
    Q3 Computer Networks and Communications
    Q3 Computer Science Applications
  2. Ovidiu, M., Ioan, M., Husi, G.: Advanced management and monitoring functions at the TMA 550AL manufacturing centre, used for ATR.
    RIIM. 2 (1-2), 1-4, 2015.
  3. Kovendi, Z., Gergely, E., Coroiu, L., Husi, G.: Algorithm for Modeling and Checking Differential Equations in Nonlinear Process Control.
    JCSCS. 8 (2), 29-34, 2015.
  4. Husi, G.: Alternatív hajtású járművek fejlesztésének irányai a Debreceni Egyetem Műszaki Karán.
    Magyar energetika. 22 (2), 36-38, 2015.
  5. Costea, C., Silaghi, H., Gergely, E., Coroiu, L., Nagy, Z., Husi, G.: Approach of PID Controller Tuning for Ball Mill.
    In: International Symposium on Fundamentals of Electrical Engineering, ISFEE : [conference proceedings], IEEE, Piscataway, 1-4, 2015. ISBN: 9781479968206
  6. Gergely, E., Costea, C., Coroiu, L., Silaghi, H., Husi, G.: Method for Identifying the Environmental Noise Model for City Traffic.
    In: Engineering of Modern Electric Systems (EMES), 2015 13th International Conference on : [conference proceedings], IEEE, [S.l.], 1-4, 2015. ISBN: 9781479976492
  7. Husi, G.: Position Singularities and Ambiguities of the KUKA KR5 Robot.
    IJET. 1 (1), 44-50, 2015.
  8. Imam, S., Azmy, A., Rashad, E., Husi, G.: Sizing And Economic Analysis of Hybrid PV/PEMFC Systems for Remote Areas Residential Utilization.
    Nonconvent. Techn. Rev. 3 37-42, 2015.
2014
  1. Csokmai, L., Tarca, R., Bungau, C., Husi, G.: A Comprehensive Approach to Offline Advanced Error Troubleshooting in Intelligent Manufacturing Systems.
    In: 5th International Conference on Computers Communications and Control, ICCCC 2014 : [conference proceedings], [s.n.], Oradea, 12-19, 2014.
  2. Husi, G.: Adattárolás.
    In: Fenntartható energetika megújuló energiaforrások optimalizált integrálásával. Szerk.: Kalmár Ferenc, Akadémiai Kiadó, Budapest, 129-130, 2014. ISBN: 9789630595407
  3. Husi, G., Szemes, P.: A DEnzero kutatás céljára igénybe vett laborháttér.
    In: Fenntartható energetika megújuló energiaforrások optimalizált integrálásával. Szerk.: Kalmár Ferenc, Akadémiai Kiadó, Budapest, 132-135, 2014. ISBN: 9789630595407
  4. Husi, G.: A helyben termelt energia és az energiahatékonyság.
    In: Fenntartható energetika megújuló energiaforrások optimalizált integrálásával. Szerk.: Kalmár Ferenc, Akadémiai Kiadó, Budapest, 124-127, 2014. ISBN: 9789630595407
  5. Husi, G., Szász, C., Hashimoto, H.: Application of reconfigurable hardware technology in the development and implementation of building automation systems.
    EEMJ. 13 (11), 2899-2905, 2014.
    Folyóirat-mutatók:
    Q3 Environmental Engineering
    Q3 Management, Monitoring, Policy and Law
    Q3 Pollution
  6. Imam, S., Azmy, A., Rashad, E., Husi, G.: Assessing the Effect of Design Parameters on Optimal Size of Isolated PV Systems for Residential Utilizations.
    In: System Integration (SII), 2014 IEEE/SICE International Symposium, IEEE, [s.l.], 234-239, 2014. ISBN: 9781479969425
  7. Husi, G., Szász, C., Hashimoto, H., Niitsuma, M.: Building mechatronics simulation system.
    In: IMT Oradea - 2014 : Proceedings of the annual session of scientific papers : volume XIII (XXIII) : may 29 - may 31, 2014, Oradea, Romania. Ed.: Colin Baban [et al.], University of Oradea Publishing House, Oradea, 363-367, 2014. ISBN: 9786061012763
  8. Husi, G., Szász, C., Hashimoto, H., Niitsuma, M.: Building mechatronics simulation system.
    Anale. Univ. Oradea = Fasc. Manag. Techn. Engin. 23 (13) (1), 307-310, 2014.
  9. Husi, G.: Communication Error Detection of Automative ECUs.
    JCSCS. 7 (1), 35-38, 2014.
  10. Bánóczy, E., Csernusné Ádámkó, É., Husi, G., Piros, S., Szász, C., Szemes, P., Vitéz, A.: Épületmechatronika.
    In: Fenntartható energetika megújuló energiaforrások optimalizált integrálásával. Szerk.: Kalmár Ferenc, Akadémiai Kiadó, Budapest, 119-166, 2014. ISBN: 9789630595407
  11. Husi, G.: Esettanulmányok.
    In: Fenntartható energetika megújuló energiaforrások optimalizált integrálásával. Szerk.: Kalmár Ferenc, Akadémiai Kiadó, Budapest, 132-138, 2014. ISBN: 9789630595407
  12. Szabó, L., Ruba, M., Szász, C., Chindris, V., Husi, G.: Fault Tolerant Bio-Inspired System Controlled Modular Switched Reluctance Machine.
    Automatika. 55 (1), 53-63, 2014.
    Folyóirat-mutatók:
    Q3 Computer Science (miscellaneous)
    Q4 Control and Systems Engineering
  13. Husi, G.: Intelligens épületek kialakításának épületmechatronikai koncepciója.
    In: Fenntartható energetika megújuló energiaforrások optimalizált integrálásával. Szerk.: Kalmár Ferenc, Akadémiai Kiadó, Budapest, 122-124, 2014. ISBN: 9789630595407
  14. Husi, G., Szász, C.: Intelligens épület felügyeleti és eseménykövetési rendszerének megtervezése LABVIEW környezetben.
    In: Fenntartható energetika megújuló energiaforrások optimalizált integrálásával. Szerk.: Kalmár Ferenc, Akadémiai Kiadó, Budapest, 135-138, 2014. ISBN: 9789630595407
  15. Husi, G.: Intelligens terek - intelligens épületek.
    In: Fenntartható energetika megújuló energiaforrások optimalizált integrálásával. Szerk.: Kalmár Ferenc, Akadémiai Kiadó, Budapest, 119-121, 2014. ISBN: 9789630595407
  16. Szász, C., Husi, G.: LabView Software-based Building Supervising and Events Monitor System for Net Zero-energy Strategies Implementation.
    RIIM. 1 (1), 1-7, 2014.
  17. Husi, G.: Mérések az intelligens épületben.
    In: Fenntartható energetika megújuló energiaforrások optimalizált integrálásával. Szerk.: Kalmár Ferenc, Akadémiai Kiadó, Budapest, 128-132, 2014. ISBN: 9789630595407
  18. Husi, G.: Mérés és adatgyűjtés folyamata intelligens épületben.
    In: Fenntartható energetika megújuló energiaforrások optimalizált integrálásával. Szerk.: Kalmár Ferenc, Akadémiai Kiadó, Budapest, 128-129, 2014. ISBN: 9789630595407
  19. Husi, G.: OLAP mint vizualizációs eszköz intelligens épületben.
    In: Fenntartható energetika megújuló energiaforrások optimalizált integrálásával. Szerk.: Kalmár Ferenc, Akadémiai Kiadó, Budapest, 130-132, 2014. ISBN: 9789630595407
  20. Husi, G., Szemes, P., Bartha, I., Piros, S., Vitéz, A.: Recent research results of advanced building automation.
    In: Proceedings of Denzero International Conference: Sustainable energy by optmal integration of renewable energy sources / [publ. by University of Debrecen], Debreceni Egyetem, Debrecen, 165-173, 2014. ISBN: 9789634737360
  21. Tiba, Z., Kertész, J., Husi, G., Békési, Z.: Replacing the ICE by electric motor of the IVECO 150E Eurocargo Hard-Press Garbage Truck.
    RIIM. 1 (1-2), 1-9, 2014.
  22. Vesselényi, T., Bungau, C., Husi, G.: Research equipment and computation techniques for Intelligent Building applications.
    In: System Integration (SII), 2014 IEEE/SICE International Symposium, IEEE, [s.l.], 228-233, 2014. ISBN: 9781479969425
  23. Bartha, I., Vitéz, A., Husi, G.: Standard industrial inverter controlled drive chain for various type of EV.
    RIIM. 1 (1-2.), 1-5, 2014.
  24. Dragomir, G., Pancu, R., Georgescu, L., Beles, H., Husi, G.: Studies about reflected temperature variation for the car brake disc.
    In: International Congress Science in Management of Automotive & Transportation engineering, Smat 2014 : [conference proceedings], [s.n.], [s.l.], 399-402, 2014. ISBN: 9786061408641
  25. Burca, M., Lucaciu, I., Moisa, R., Bereteu, L., Husi, G.: Technological Aspects of the Self-Shielding Tubular Wire Welding of Overlap Joining on Reinforcing Steel.
    Anale. Univ. Oradea = Fasc. Manag. Techn. Engin. 23 (13) (3), 11-16, 2014.
  26. Szász, C., Husi, G.: The Intelligent Building Definition: a Central-European Approach.
    In: System Integration (SII), 2014 IEEE/SICE International Symposium, IEEE, [s.l.], 216-221, 2014. ISBN: 9781479969425
  27. Husi, G.: The latest research results of the Intelligent buildings group in the DEnzero project.
    In: System Integration (SII), 2014 IEEE/SICE International Symposium, IEEE, [s.l.], 240-244, 2014. ISBN: 9781479969425
  28. Mihaila, S., Pancu, R., Husi, G.: Theoretical and Experimental Research on the Improvement of the Cooling on Concave Semi Molds for Plastic Materials Processing.
    Anale. Univ. Oradea = Fasc. Manag. Techn. Engin. 13 (2), 118-122, 2014.
2013
  1. Husi, G., Dávid, E., Erdei, I., Szabó, G., Szemes, P.: Building automation simulation and research toolset for building mechatronics.
    An. Oradea Univ. Fasc. Manag. Techn. Engineer. 22 (1), 105-110, 2013.
  2. Husi, G., Dávid, E., Erdei, I., Szabó, G., Szemes, P.: Building automation simulation and research toolset for building mechatronics.
    In: IMT Oradea - 2013 : Proceedings of the annual session of scientific papers : may 30 - june 2013, Felix SPA, Oradea Romania. Ed.: Calin Baban [et al.], Editura Universitatii, Oradea, 137-142, 2013. ISBN: 9786061010844
  3. Husi, G., Szász, C.: Building Automation Technology in Electrical Engineering and Mechatronics Department in Debrecen.
    In: 16. Ulusal Makína Teorisi Sempozyumu 2013 / [ed. Attatürk Universiti], [s.n.], Erzurum, 671-674, 2013.
  4. Husi, G., Dudás, É., Tóth, N.: Building Mechatronics as the device of improving energy efficiency in intelligent buildings.
    In: Proceedings of CERiS'13 - Workshop on Cognitive and Eto-Robotics in iSpace. Ed.: Korondi, Péter, BME, Budapest, 32-37, 2013. ISBN: 9789633130865
  5. Husi, G., Dávid, E., Erdei, T., Szemes, P.: Building Mechatronics Research Centre as energy aware Intelligent Space.
    In: Industrial Electronics Society, IECON 2013 - 39th Annual Conference of the IEEE, [S.n.], New York, 7814-7818, 2013. ISBN: 9781479902231
  6. Husi, G., Liker, I., Bartha, I., Vitéz, A., Tóth, J.: Circuit Arrangement and a Method for Controlling an Ac Drive System of an Electric Vehicle.
    [szabadalom]
  7. Husi, G., Dávid, E., Erdei, T., Szemes, P.: Development of simulation and research toolset for domestic energy utilization.
    In: International Youth Conference on Energetics 2013 (IYCE '13), [S.n.], Budapest, 1-7, 2013. ISBN: 978146735544
  8. Tiba, Z., Kertész, J., Békési, Z., Husi, G.: Drivetrain modification of the IVECO150e Eurocargo Hard-press Garbage Truck.
    In: Proceedings of the 1st international scientific conference on advances in mechanical engineering (ISCAME 2013) : 10-11 October 2013, Debrecen, Hungary. Szerk.: Mankovits Tamás, Debreceni Egyetem Műszaki Kar, Gépészmérnöki Tanszék, Debrecen, 194-200, 2013. ISBN: 9789634736233
  9. Husi, G., Szemes, P., Bartha, I.: Épületfelügyelet és biztonságtechnika.
    TERC Kereskedelmi és Szolgáltató Kft., Budapest, 223 p., 2013. ISBN: 9789639968653
  10. Husi, G., Szemes, P., Tóth, N., Dudás, É.: Establishment of new research infrastructure at Department of electrical engineering and mechatronics, faculty of engineering, University of Debrecen.
    In: IMT Oradea - 2013 : Proceedings of the annual session of scientific papers : may 30 - june 2013, Felix SPA, Oradea Romania. Ed.: Calin Baban [et al.], Editura Universitatii, Oradea, 143-148, 2013. ISBN: 9786061010844
  11. Husi, G., Szemes, P., Tóth, N., Dudás, É.: Establishment of new research infrastructure at Department of electrical engineering and mechatronics, faculty of engineering, University of Debrecen.
    An. Oradea Univ. Fasc. Manag. Techn. Engineer. 22 (1), 111-116, 2013.
  12. Szász, C., Husi, G., Szemes, P.: LabView software-based building supervising and events monitor system for net zero-energy strategies implementation.
    Int. Rev. Appl. Sci. Eng. 4 (2), 171-176, 2013.
  13. Husi, G.: Mesterséges intelligencia alkalmazása.
    TERC Kereskedelmi és Szolgáltató Kft., Budapest, 97 p., 2013. ISBN: 9789639968851
  14. Szász, C., Husi, G.: Novel Multimodal Communication Skills Implementation on the NI-9631 Robot.
    In: Proceedings of the IECON 2013: 39th Annual Conference of the IEEE Industrial Electronics Society, IEEE, [Danvers], 7837-7842, 2013. ISBN: 9781479902248
  15. Husi, G., Dávid, E., Erdei, T., Pető, G., Szemes, P.: Reconfigurable Simulation and Research Toolset for Building Mechatronics.
    In: Proceedings of CERiS'13 - Workshop on Cognitive and Eto-Robotics in iSpace. Ed.: Korondi, Péter, BME, Budapest, 26-31, 2013. ISBN: 9789633130865
  16. Bartha, I., Husi, G., Vitéz, A.: Study of solar cell energy production mounted on a four way rotating device, designed for electrical car recharging.
    In: Proceedings of CERiS'13 - Workshop on Cognitive and Eto-Robotics in iSpace. Ed.: Korondi Péter, BME, Budapest, 140-143, 2013. ISBN: 9789633130865
  17. Husi, G.: Válogatott fejezetek az elektrotechnikából.
    TERC Kereskedelmi és Szolgáltató Kft., Budapest, 134 p., 2013. ISBN: 9789639968752
  18. Husi, G.: Világítástechnika (létesítménymérnököknek).
    TERC Kereskedelmi és Szolgáltató Kft., Budapest, 132 p., 2013. ISBN: 9789639968844
2012
  1. Husi, G., Tarca, R.: Advanced mechatronics systems.
  2. Husi, G., Szemes, P.: Control of NI SbRIO-9631 prototype robot on the basis of hand movement.
    In: 10th IFAC Symposium on Robot Control 2012 : (SYROCO 2012) ; Dubrovnik, Croatia, 5 - 7 September 2011, Curran, Red Hook, 859-862, 2012. ISBN: 9783902823113
  3. Husi, G., Lóki, J., Kiss Bacsó, L.: Geotermikus energia hasznosítási lehetőségének térinformatikai feldolgozása Létavértes környékén.
    In: Az elmélet és gyakorlat találkozása a térinformatikában III. - Térinformatikai konferencia és szakkiállítás. Szerk.: Lóki József, Debreceni Egyetemi Kiadó, Debrecen, 169-174, 2012. ISBN: 9789633182185
  4. Tiba, Z., Husi, G.: Mechanical Design of a Mechatronics Systems: laboratory handbook.
    [University of Debrecen Faculty of Engineering], Debrecen, 152. p p., 2012. ISBN: 9789634735250
  5. Husi, G.: Mechatronics Control Systems: course Book.
    Debreceni Egyetem, Debrecen, 322 p., 2012. ISBN: 9789634735205
  6. Husi, G.: Mechatronics Control Systems: Laboratory handbook.
    Debreceni Egyetem, Debrecen, 150 p., 2012. ISBN: 9789634735212
  7. Husi, G., Szemes, P., Bartha, I.: PLC Programming: course book.
    [University of Debrecen Faculty of Engineering], Debrecen, 375, [1] p., 2012. ISBN: 9789634735182
  8. Husi, G., Szemes, P., Bartha, I.: PLC Programming: laboratory handbook.
    [University of Debrecen Faculty of Engineering], Debrecen, 133, [1] p., 2012. ISBN: 9789634735199
  9. Yildirim, Ş., Tarca, R., Husi, G.: Recent innovations in mechatronics: proceedings of 18th Building Services, Mechanical and Building Industry days, International Conference Electrical Engineering and Mechatronics session.
    Debreceni Egyetem, Debrecen, 69 p., 2012. ISBN: 9789634734635
  10. Cofaru, I., Cofaru, N., Roman, R., Husi, G.: The experimental study of the hybrid fixation in ACL reconstruction.
    Int. Rev. Appl. Sci. Eng. 3 (2), 113-117, 2012.
2011
  1. Yildirim, Ş., Kalkat, M., Uzmay, I., Husi, G.: Design of a modified linear quadratic regulator for vibration control of suspension systems.
    Int. Rev. Appl. Sci. Eng. 2 (1), 25-31, 2011.
  2. Bartha, I., Tóth, J., Husi, G.: Effect of a four-way rotating device to the electric energy production with solar cell.
    An. Oradea Univ. Fasc. Manag. Techn. Engineer. 10 (20) (1), 3, 2011.
  3. Bartha, I., Tóth, J., Husi, G.: Effect of a four-way rotating device to the electric energy production with solar cell.
    In: Proceedings of the Annual Session of Scientific Papers: IMT Oradea - 2011 : Extended Abstracts. Ed.: Tiberiu Vesselenyi, Constantin Bungau, Florian Sandu Blaga, Mircea Teodor, Alexandru Rus, Radu Catalin Tarca, Editura Universitatii din Oradea, Oradea, 31, 2011. ISBN: 9786061005086
  4. Szűcs, E., Budai, I., Husi, G., Jenei, T., Kocsis, I., Kulcsár, B.: Geotermikus rendszerek fenntarthatóságának integrált modellezése: 5. munkacsoport, Geotermikus rendszerek geológiai vizsgálata, gazdasági - és folyamat modelljének kialakítása, életciklus elemzése.
    Debreceni Egyetem, Debrecen, 124 p., 2011. ISBN: 9769634734505
  5. Husi, G.: How can a building get intelligent?.
    An. Oradea Univ. Fasc. Manag. Techn. Engineer. 10 (20) (3), 2, 2011.
  6. Husi, G.: Mérnök informatika Bsc vállalati információs rendszerek szakirány tapasztalatai a DE Műszaki Karon[elektronikus dokumentum] = status report on the enterprise information systems specialization of computer science and engineering Bsc at the Faculty of Engineering, University of Debrecen.
    In: Informatika a felsőoktatásban 2011 konferencia [elektronikus dokumentum] : konferencia kiadvány : Debrecen, 2011. augusztus 24-26. : CD-ROM. Szerk.: Cser László, Herdon Miklós ; grafika Pikó Sándor, Debreceni Egyetem Informatikai Kar, Debrecen, 1-5, 2011. ISBN: 9789634734611
  7. Husi, G., Tóth, A., Husi, G.: NI LabView Robotics Starter Kit vezérlése kézmozgás alapján.
    In: XVII. Épületgépészeti, Gépészeti és Építőipari Szakmai Napok : szakkiállítás és Nemzetközi Tudományos Konferencia 2011. október 13-14. [elektronikus dokumentum]. Szerk.: Kalmár Ferenc, Balla Tibor ; [közread. a] Debreceni Egyetem Műszaki Kar, Debreceni Egyetem Műszaki Kar, Debrecen, 1-6, 2011. ISBN: 9789634734642
  8. Yildirim, Ş., Eski, I., Erkaya, S., Husi, G.: Vibration analysis of food industries mixing systems for long life using neural networks.
    In: IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), 2011 : 3-7 July 2011 Budapest, Hungary, IEEE, Piscataway, NJ, 197-202, 2011. ISBN: 9781457708381
2010
  1. Tiba, Z., Husi, G., Manó, S., Kiss, L., Jónás, Z., Nádházi, L., Csernátony, Z.: An easy to use device for lubricity examination.
    Biomech. Hung. 2 (2), 27-30, 2010.
  2. Yildirim, Ş., Husi, G.: Artifical neural network applications in engineering problems.
    Editura Universitătii din Oradea, Oradea, 78 p., 2010. ISBN: 9786061002528
  3. Husi, G., Szász, C., Chindris, V.: Artificial immune system implementation upon embryonic machine for hardware fault-tolerant industrial control applications.
    GJCST. 10 (4), 60-66, 2010.
  4. Husi, G., Kiss, J., Mikula, G.: A vállalatok működésének modellezése.
    Debreceni Egyetem Műszaki Kar, Debrecen, 139 p., 2010. ISBN: 9789638861429
  5. Yildirim, Ş., Kalkat, M., Uzmay, I., Husi, G.: Design of a modified linear quadratic regulator for vibration control of suspension systems.
    In: 16th "Building Services, Mechanical and Building Industry Days" International Conference : 14-15 October 2010 Debrecen, Hungary / [szerk. ...Kalmár Ferenc, ....Csomós György, Csáki Imre], Debreceni Egyetem, Debrecen, 463-476, 2010. ISBN: 9789634734239
  6. Yildirim, Ş., Husi, G.: Design of a modified linear quadratic regulator for vibration control of suspension systems of military and civiL vehicle.
    Int. Rev. Appl. Sci. Eng. 1 (1-2), 55-60, 2010.
  7. Szász, C., Chindris, V., Husi, G.: Embryonic systems implementation with FPGA-based artificial cell network hardware architectures.
    Asian J Control. 12 (2), 208-215, 2010.
    Folyóirat-mutatók:
    Q2 Control and Systems Engineering
  8. Lucaciu, I., Burca, M., Husi, G.: Installation for the mechanized welding of tubular plates in blast-pressure tanks.
    Rev. De Tech. Neconvent. = Nonconvent. Techn. Rev. 14 (1), 21-25, 2010.
  9. Husi, G.: Lean menedzsment a gyakolatban.
    Debreceni Egyetem, Debrecen, 43 p., 2010. ISBN: 9789638861436
  10. Tóth, J., Husi, G., Nagy, I.: Mechatronics mindstorming with Lego mindstorms NXT.
    Carpathian J. Electr. Comp. Eng. 3 (1), 94-96, 2010.
  11. Husi, G.: Production line construction for educational purposes.
    An. Oradea Univ. Fasc. Manag. Techn. Engineer. 19 (9) (3), 1-7, 2010.
  12. Husi, G.: Rendszerelmélet - rendszerszemlélet.
    In: A vállalatok működésének modellezése / Husi Géza; T. Kiss Judit; Mikula Gyula, Debreceni Egyetem Műszaki Kar, Debrecen, 5-8, 2010. ISBN: 9789638861429
  13. Burca, M., Codrean, C., Voda, M., Lita, M., Lucaciu, I., Husi, G.: Research and technology development in the field of the resistance brazing of carbide plates to metals using amorphous brazing foils.
    Rev. De Tech. Neconvent. = Nonconvent. Techn. Rev. 14 (3), 15-18, 2010.
  14. Husi, G., Tóth, J., Darai, G.: Six legged autonomous robots for military and for civil use.
    Carpathian J. Electr. Comp. Eng. 3 2010 40-42, 2010.
  15. Husi, G., Diószeginé Zentay, É.: Steps of the execution of the Lean philosophy.
    An. Oradea Univ. Fasc. Manag. Techn. Engineer. 19 (9) (2), 1-4, 2010.
2009
  1. Yildirim, Ş., Husi, G.: Design of a modified linear quadratic regulator for vibration control of suspension systems.
    Carpathian J. Electr. Comp. Eng. 2 (1), 7-12, 2009.
  2. Husi, G.: Gyártósor modell építése oktatási célokra.
    In: 15th "Building Services, Mechanical and Building Industry Days" : International Conference : Debrecen, ... 15-16 October 2009. Szerk.: Kalmár Ferenc, Kocsis Imre, Csomós György, Csáki Imre, Debreceni Egyetem, Debrecen, 216-220, 2009.
  3. Kalmár, F., Kalmár, T., Csáky, I., Husi, G.: Interrelation between ACH and air temperature distribution in a room.
    In: ROOMVENT 2009, 111th International Roomvent Conference Proceedings : May 24- 27 May, 2009 Busan, Korea, [S.n.], Busan, 911-917, 2009.
  4. Husi, G.: Lean menedzsment a gyakolatban.
    Debreceni Egyetem Műszaki Kar, Debrecen, 43 p., 2009. ISBN: 9789638861436
  5. Husi, G., Kalmár, F.: Létesítményenergetikai klaszter az Észak-alföldi régióban = Building energy cluster in Northern Great Plain Region.
    In: X. ENELKO : XIX. SzámOkt : Nemzetközi Energetika - Elektrotechnika és Számítástechnika Konferencia : Marosvásárhely, 2009. október 8-11. = International Conference on Energetics-Electrical Engineering and Computer Science : Targu Mures, October 8-11, 2009 = Confirenta Internationala de Energetica-Electrotehnica si Informatica, Targu Mures, 8-11 octombrie 2009. Szerk.: Bíró Károly Ágoston, Sebestyén-Pál György, Erdélyi Magyar Műszaki Tudományos Társaság, Marosvásárhely, 55-59, 2009, (ISSN 1842-4546)
  6. Husi, G., Kiss Bacsó, L.: Modellek alkalmazása a térinformatikában.
    In: 15th "Building Services, Mechanical and Building Industry Days" : International Conference : Debrecen, ... 15-16 October 2009. Szerk.: Kalmár Ferenc, Kocsis Imre, Csomós György, Csáki Imre, Debreceni Egyetem, Debrecen, 356-363, 2009. ISBN: 9789634733133
  7. Tóth, J., Kalmár, F., Husi, G., Csiha, A., Budai, I., Bartha, I., Kulcsár, B., Kocsis, I., Tiba, Z.: Napelem, a jövő energiaforrása.
    CEZE Kft., Debrecen, 172 p., 2009. ISBN: 9789638861481
  8. Husi, G.: Napelemek gyártástechnológiái.
    In: Napelem, a jövő energiaforrása / főszerk. Tóth János, CEZE Kft., Debrecen, 75-98, 2009.
  9. Husi, G.: Napelemek gyártástechnológiái.
    In: A napelemről A-Z-ig. Szerk.: Tóth János, CEZE Kft., Debrecen, 68-90, 2009. ISBN: 9789638861443
  10. Husi, G., Tóth, J., Bartha, I.: Napelemek gyártástechnologiája a Yingli Green Energy társaságnál.
    Debreceni műszaki közl. 8 (1-2), 135-146, 2009.
  11. Kalmár, T., Yildirim, Ş., Eski, I., Husi, G., Kalmár, F.: Neural network predictor for thermal comfort conditions.
    JCSCS. 2 (2), 97-102, 2009.
  12. Gergely, E., Yildirim, Ş., Husi, G.: PLC programs design using signal interpreted petri networks.
    JCSCS. 2 (1), 102-106, 2009.
  13. Yildirim, Ş., Husi, G., Gergely, E.: Position Control of a Four-Legged Walking Robot with Neural Network.
    J. Comp. Sci. Contr. 2 (2), 134-138, 2009.
  14. Husi, G., Diószeginé Zentay, É.: Projektek előkészítése induló klaszterben.
    In: Építésszervezés és építéstechnológia konferencia 2009 : innovatív módszerek és technológiák : konferencia kiadvány : 2009. október 29. : Budapest, Margitszigeti Thermal Hotel. Szerk.: Kocsis Tamás, Terc Kft., Budapest, 42-45, 2009.
  15. Husi, G., Diószeginé Zentay, É.: Projekt menedzsment automatizálása informatikai technológiával.
    In: Projektmenedzsment a gazdaságban : 12. Projektmenedzsment Fórum, 2009. április 2. Budapest : előadásaik gyűjteménye. Közread.: a Hírközlési és Informatikai Tudományos Egyesület, HITE, Budapest, 197-201, 2009.
  16. Debreceni, A., Husi, G.: Raktári automatikus alkatrész azonosítás bevezetése nagyvállalati környezetben.
    In: 15th "Building Services, Mechanical and Building Industry Days" : International Conference : Debrecen, ... 15-16 October 2009. Szerk.: Kalmár Ferenc, Kocsis Imre, Csomós György, Csáki Imre, Debreceni Egyetem, Debrecen, 298-310, 2009.
2008
  1. Husi, G., Bartha, I.: Bemutatjuk partnerünket: DEMK Villamosmérnöki és Mechatronikai Tanszék.
    Schneider magazin 8 (4), 18-19, 2008.
  2. Husi, G.: Daru erőelemzése hibrid neuronhálózattal.
    Gép. 59 (8), 31-36, 2008.
  3. Yildirim, Ş., Kalkat, M., Uzmay, I., Husi, G.: Force analysis of bearings on cranes using a proposed recurrent hybrid neutral network.
    Zesz. Nauk. Politech. Poznań. 9 125-135, 2008.
  4. Husi, G., Darai, G.: Improving education quality by using high technology devices.
    In: 14th "Building Services, Mechanical and Building Industry days" : international conference, 30-31 October 2008, Debrecen, Hungary / [szerk. Kalmár Ferenc, Csiha András], Debreceni Egyetem, Debrecen, 356-365, 2008.
2007
  1. Husi, G.: A Lean alapú termelés kialakításának lépései.
    Debreceni műszaki közl. 6 (2), 59-73, 2007.
  2. Husi, G.: Application of the methods of quality management systems for analysing the police of the Republic Hungary.
    e-articles 1-7, 2007.
  3. Husi, G., Kiss, J., Mikula, G.: A vállalatok működésének modellezése: jegyzet a rendszertan című tantárgyhoz.
    Civis-Copy Kft., Debrecen, 140 p., 2007. ISBN: 9789638861429
  4. Sipos, I., Husi, G.: Az emberi tényezők szerepének meghatározása a légijárművek karbantartásának minőségbiztosításában.
    Debreceni műszaki közl. 6 (1), 45-57, 2007.
  5. Husi, G.: Az ügyfelek elégedettségét befolyásoló néhány tényező a rendőri munkában.
    Minőség és megbízhatóság. 41 (4), 214-219, 2007.
  6. Husi, G.: Munkakörelemzés (minőségfejlesztési projekt) a jellegzetes emberi hibázás megelőzésére légijárművek karbantartásánál.
    Műszaki füzetek (MTA-Db) 4 1-7, 2007.
  7. Husi, G., Elekes, E., Gaál, T.: Tudásbázis fejlesztés informatikai eszközzel.
    Szabolcs-Szatmár-Bereg M. Rendőr-főkapitányság, [Nyíregyháza], 82 p., 2007. ISBN: 9789630640275
2006
  1. Husi, G., Szűcs, E., Elekes, E.: A rendőri munka minőségfejlesztésének alapjai.
    Szabolcs-Szatmár-Bereg megyei RFK, Nyíregyháza, 82 p., 2006. ISBN: 9630613220
  2. Elekes, E., Husi, G.: Minőségfejlesztés a homogén rendőrségi munkahelyek által, a dolgozóval szemben támasztott követelmények meghatározásával.
    In: A rendőri munka minőségfejlesztésének alapjai. Írták: Husi Géza, Szűcs Edit, Elekes Edit, Szabolcs-Szatmár-Bereg megyei RFK, Nyíregyháza, 70-77, 2006. ISBN: 9630613220
2005
  1. Husi, G.: Minőségfejlesztés a folyamatok javításával a Magyar Köztársaság Rendőrségénél.
    Debreceni műszaki közl. 4 (2), 43-60, 2005.
  2. Husi, G.: Rendőrségi vezetők szervezeti döntéseinek támogatása, üzleti intelligenciával rendelkező, szemantikus réteg technológia elvén működő információrendszerrel = Assistance of leaders decision-making with management informationsystem that working by business intelligence and technology of semantical layer at the Hungarian police.
    Bolyai szemle. 14 (4), 119-137, 2005.
  3. Husi, G.: Szemantikus rétegtechnológia a rendőrségi munkában.
    Magyar rendészet. 5 (1), 128-135, 2005.
2004
  1. Husi, G.: A minőség mint a záróvizsga-dolgozat témája.
    Magyar felsőoktatás. 3 7-8, 2004.
  2. Husi, G., Kiss Bacsó, L., Mikula, G.: A munkaértékfelmérés gyakorlata az általunk kidolgozott BAHUMI módszerrel.
    Debreceni műszaki közl. 3 (2), 85-97, 2004.
2003
  1. Husi, G.: A minőségfejlesztés két éve a Balmazújvárosi Rendőrkapitányságon: minőségi munka a végeken.
    [S.n.], [S.l.], 75 p., 2003.
  2. Husi, G.: Gap analízis a magyarországi futball huliganizmusról és a tömegkontrollról.
    In: Tömegkontroll és futballhuliganizmus : Interregionális tanulmány 2000-2003. Közread.: Főnix Guard Security Debrecen, Polite Rotterdam Rijmond, Hajdú-Bihar Megyei Rendőr Főkapitányság, Hajdú-Bihar Megyei Rendőr Főkapitányság ; Főnix Guard Security Debrecen, Debrecen, 9-15, 2003.
  3. Husi, G.: Rendőri munka értékelésének meghatározása a Hajdú-Bihar Megyei Rendőr-főkapitányságon.
    Debreceni műszaki közl. 2 (1), 101-108, 2003.
  4. Husi, G.: Rendőri munka értékének meghatározása a Hajdú-Bihar megyei rendőrfőkapitányságon.
    Debreceni műszaki közl. 2 (1), 101-108, 2003.
  5. Husi, G.: Rendőri munka értékének meghatározása a Hajdú-Bihar Megyei Rendőr-főkapitányságon.
    [S.n.], [S.l.], 45 p., 2003.
2002
  1. Husi, G.: A műszaki menedzserképzés fejlesztése a Debreceni Egyetem Műszaki Főiskolai Karán.
    Magyar felsőoktatás. 7 51-52, 2002.
  2. Krauszné Princz, M., Husi, G.: A WEB-es keresők használatának tanítása.
    In: Informatika a felsőoktatásban 2002, Debrecen, Debreceni Egyetem, 2002. aug. 28-30, [Debreceni Egyetem], Debrecen, 570-577, 2002. ISBN: 9634726917
  3. Husi, G., Krauszné Princz, M.: Informatikával támogatott oktatási projekt a Hajdú-Bihar megyei Rendőr-főkapitányságon.
    In: Informatika a felsőoktatásban 2002, Debrecen, Debreceni Egyetem, 2002. aug. 28-30. [elektronikus dokumentum] : [CD], [Debreceni Egyetem], Debrecen, , 2002.
  4. Szűcs, E., Sutka, S., Baksa, L., Husi, G.: One way street for the Hajdú-Bihar County Police Department: TQM.
    Debreceni műszaki közl. 1 (1), 125-131, 2002.
  5. Szűcs, E., Sutka, S., Baksa, L., Husi, G.: Önértékelési útmutató a Borsod-Abaúj-Zemplén Megyei Rendőr-főkapitányság kapitányságainak önértékelési folyamataihoz, a TQM bevezetésének első lépéséhez.
    [S.n.], Miskolc, 2002.
  6. Husi, G., Kocsis, I.: The elaboration of Coil and Lamp tracking system for the manufacture of bulbs based on informatics.
    In: Gépészet 2002 : proceedings of the third conference on mechanical engineering, Budapest University of Technology and Economics, May 30-31, 2002 / [ed. A. Penninger, Gy. Ziaja, G. Vörös], Budapesti Műszaki és Gazdaságtudományi Egyetem, Budapest, 710-714, 2002. ISBN: 9636991650
  7. Husi, G.: Why I like the (ax + b)/x function?.
    BiAS. 14 (1), 167-171, 2002.
2001
  1. Husi, G.: Informatika III.: CIM rendszerek.
    Debreceni Egyetem Műszaki Főiskolai Kar, Debrecen, 24 p., 2001.
  2. Szűcs, E., Sutka, S., Baksa, L., Husi, G.: Önértékelési útmutató a Hajdú-Bihar Megyei Rendőr-főkapitányság önértékelési folyamataihoz, a TQM bevezetés első lépéséhez.
    [S.n.], Debrecen, 2001.
  3. Husi, G., Szűcs, E., Baksa, L., Sutka, S.: Tanulmány a Teljes körű Minőségmenedzsment (TQM) bevezethetőségéről a Magyar Köztársaság Rendőrségén.
    HBMRFK, Debrecen, [30] p., 2001.
  4. Husi, G.: TQM at the Hajdu-Bihar County Police Department: the first step.
    In: MicroCAD '2001 : International scientific conference : 1-2 March, 2001 : Management / [szerk. Lehoczky László, Kalmár László], Miskolci Egyetem Innovációs és Technológia Transzfer Centruma, Miskolc, 75-80, 2001.
2000
  1. Husi, G.: Coil and Lamp Tracking System (CLTS) in GE Lighting.
    In: MicroCAD '2000 : International computer science conference : February 23-24, 2000 : Informatika : information technology & information engineering. / [szerk. Lehoczky László, Kalmár László], Miskolci Egyetem Innovációs és Technológia Transzfer Centruma, Miskolc, 229-234, 2000.
  2. Husi, G.: Informatikai alapokon nyugvó Minőség Figyelési Rendszer kialakítása izzólámpák gyártásához.
    Tud. közl. (DE. MFK). 25 119-124, 2000.
  3. Husi, G., Szűcs, E.: Minőségügyi rendszer kiépítése a Kossuth Lajos Tudományegyetem Műszaki Főiskolai Karán 2.
    In: Minőségoktatók Konferenciája 2000.: 5. jubileumi rendezvény, Szent István Egyetem Ybl Miklós Főiskolai Kar, Budapest, 1-5, 2000.
  4. Husi, G., Debreceni Egyetem.: Projekt menedzsment: tanári jegyzet.
    Debreceni Egyetem Műszaki Főiskolai Kar, Debrecen, 76 p., 2000.
1999
  1. Husi, G., Kocsis, I.: A matematikai szoftverek alkalmazásának lehetőségei a matematika és a termelésmenedzsment oktatásban.
    Tud. közl. (KLTE. MFK). 24 61-84, 1999.
  2. Husi, G.: Information Serving System on the Town of Debrecen.
    In: microCAD 1999, A szekció: International Computer Science Conference / ed Lehoczky László, Kalmár László, Miskolci Egyetem, Miskolc, 38-42, 1999. ISBN: 9636613516
  3. Husi, G., Szűcs, E.: ISO vagy TQM?: avagy mit tegyen főiskolai karunk.
    Magyar minőség. 11 35-39, 1999.
  4. Szűcs, E., Husi, G.: Minőségügyi rendszer kiépítése a Kossuth Lajos Tudományegyetem Műszaki Főiskolai Karán.
    In: Minőségoktatók 4. Országos konferenciája. Szerk.: Turcsányi Károly, Zrínyi Miklós Nemzetvédelmi Egyetem, Budapest, 99-105, 1999.
  5. Husi, G., Bacsó, L.: Térinformatikai oktatás a KLTE MFK műszaki menedzser képzésében.
    In: VIII. Térinformatika a felsőoktatásban szimpózium, Kertészeti Egyetem, Budapest, 16-19, 1999.
1997
  1. Bakacsi, G., Baross, C., Élő, G., Szabó, J., Kovács, Á., Lukács, E., Nagyné Sáfár, M., Husi, G.: Emberi erőforrás és szervezeti kultúra: esettanulmány-gyűjtemény.
    Magánvállalkozásokat Fejlesztő Központ Alapítvány, Budapest, 10 p., 1997.
  2. Husi, G.: Fürdő-SHOW'97.
    In: Esettanulmány-gyűjtemény. Közread.: BKE Vezetési és Szervezési Tanszék, State University of New York, Magánvállalkozásokat Fejlesztő Központ Alapítvány, Budapest, 52-58, 1997.
  3. Bacsó, L., Mikula, G., Husi, G.: Munkaérték felmérés gyakorlati megvalósítása a GE Lighting Tungsram RT. Vákuumtechnikai Alkatrész és Gépgyárában.
    Tud. közl. (KLTE. MFK). 23 4-12, 1997.
1996
  1. Husi, G.: Informatika oktatás helyzete, távlatai a műszaki menedzser képzésben a KLTE MFK-n.
    In: Informatika a felsőoktatásban 96 - Networkshop 96.. Szerk.: Bakonyi Péter; Herdon Miklós, Debreceni Egyetem, Debrecen, 201, 1996. ISBN: 963047025X
1995
  1. Husi, G.: Informatika I.: informatika alapjai.
    KLTE MFK, Debrecen, 1995.
  2. Husi, G.: Informatika II.: vezetői információs rendszerek.
    KLTE MFK, Debrecen, 1995.
1994
  1. Husi, G.: Számítógépes termelésirányítás a KYBERNOS rendszerrel.
    Ybl MFK tud. közl. 21 68-72, 1994.
1993
  1. Husi, G.: A számítógéppel integrált gyártás (CIM) bevezetése.
    Gép. 45 (1), 31-33, 1993.
  2. Husi, G.: A számítógéppel integrált gyártás (CIM) bevezetésének egy lehetséges módszere külföldi tapasztalatok alapján.
    In: Informatika a felsőoktatásban. Szerk.: Herdon Miklós; Pethő Attila, [S.n.], Debrecen, 24-29, 1993.
  3. Husi, G.: Informatika oktatás az Ybl Miklós Műszaki Főiskolán.
    In: Informatika a felsőoktatásban : országos konferencia : Debrecen, 1993. szeptember 1-3.. Szerk.: Herdon Miklós és Pethő Attila ; [... rend., közread. a Debreceni Universitas], [Debreceni Universitas], Debrecen, 70-74, 1993.
  4. Husi, G.: Multiplexer a karbantartásban.
    Ybl MFK tud. közl. 20 42-47, 1993.
1992
  1. Husi, G.: A számítógéppel integrált gyártás (CIM) bevezetése.
    Ybl MFK tud. közl. 19 35-42, 1992.
1991
  1. Husi, G.: Informatika: tantárgyi segédlet.
    Ybl Miklós Műszaki Főiskola, Debrecen, 42 p., 1991.
feltöltött közlemény: 309 Open Access: 112
https://tudoster.idea.unideb.hu
A szolgáltatást nyújtja: DEENK