Jelenlegi hely

Statisztika

Husi Géza

Open Access publikációk letöltési adatai a DE intézményi repozitóriumából
Dátum: -
OA publikációk száma a DEA-ban: 112

Összes letöltés a DEA-ból: 9338

OrszágLetöltések
Egyesült Államok (US)4532
Magyarország (HU)2045
Németország (DE)450
Kína (CN)379
Oroszország (RU)153
Hong Kong SAR (Kínai Népköztársaság) (HK)148
Románia (RO)72
India (IN)66
Franciaország (FR)58
Hollandia (NL)58
Írország (IE)52
Egyesült Királyság (GB)46
Dél-Afrika (ZA)42
Ukrajna (UA)41
Csehország (CZ)40
Indonézia (ID)37
Kanada (CA)32
Finnország (FI)32
Törökország (TR)32
Fülöp-szigetek (PH)30
Ausztria (AT)29
Olaszország (IT)21
Japán (JP)18
Brazília (BR)17
Chile (CL)17
Ausztrália (AU)16
Egyesült Arab Emírségek (AE)15
Pakisztán (PK)15
Svájc (CH)13
Görögország (GR)13
Szlovákia (SK)13
Spanyolország (ES)12
Mexikó (MX)12
Lengyelország (PL)12
Nigéria (NG)11
Peru (PE)10
Svédország (SE)9
Algéria (DZ)8
Horvátország (HR)8
Litvánia (LT)7
Lettország (LV)7
Vietnám (VN)7
Izrael (IL)6
Szingapur (SG)6
Marokkó (MA)5
Malajzia (MY)5
Szerbia (RS)5
Banglades (BD)4
Kolumbia (CO)4
Szaud-Arábia (SA)4
Thaiföld (TH)4
Dánia (DK)3
Egyiptom (EG)3
Srí Lanka (LK)3
Bosznia-Hercegovina (BA)2
Fehéroroszország (BY)2
Elefántcsontpart (CI)2
Kamerun (CM)2
Ghána (GH)2
Kazahsztán (KZ)2
Luxemburg (LU)2
Niger (NE)2
Jemen (YE)2
Angola (AO)1
Costa Rica (CR)1
Dominikai Köztársaság (DO)1
Etiópia (ET)1
Grúzia (GE)1
Irak (IQ)1
Jordánia (JO)1
Laosz (LA)1
Líbia (LY)1
Málta (MT)1
Namíbia (NA)1
Új-Zéland (NZ)1
Seychelle-szigetek (SC)1
Szlovénia (SI)1
Zimbabwe (ZW)1
n.a.618
Megjelenés Publikáció Fájlletöltések
2024Saadah, A., Medlin, D., Saud, J., Menyhárt, L., Zheng, X., Husi, G.: Developing Robust Safety Protocols for Radiosurgery within Patient Positioning System Framework.
Machines. 12 1-21, 2024.
Folyóirat-mutatók:
Q2 Computer Science (miscellaneous) (2022)
Q3 Control and Optimization (2022)
Q2 Control and Systems Engineering (2022)
Q2 Electrical and Electronic Engineering (2022)
Q2 Industrial and Manufacturing Engineering (2022)
Q2 Mechanical Engineering (2022)
kiadói változat: 4
2023Erdei, T., Nusser, D., Husi, G.: Cyber-physical recreation of six DOF industrial robot arm.
Int. rev. appl. sci. eng. Online first 1-14, 2023.
Folyóirat-mutatók:
Q2 Architecture (2022)
Q3 Engineering (miscellaneous) (2022)
Q3 Environmental Engineering (2022)
Q4 Information Systems (2022)
Q4 Management Science and Operations Research (2022)
Q3 Materials Science (miscellaneous) (2022)
kiadói változat: 12
2023Kovács, B., Husi, G.: Ipar 4.0 szemléletű tesztelés és validálás kialakításának hatásaiaz elektronikai gyártásban.
Régiókut. szle. 8 (1), 21-29, 2023.
kiadói változat: 4
2023Masuk, A., Husi, G.: Uses of aero graphene and CNT in modern aircraft.
AIP Conf. Proc. 2941 1-9, 2023.
kiadói változat: 5
2022Tiba, Z., Győri, G., Ailer, P., Husi, G.: A Cessna 172 típusú repülőgép dízelüzemmódra alakításának megtérülése.
Repüléstudományi Közlemények 34 (2), 5-17, 2022.
kiadói változat: 5
2022Masuk, A., Husi, G.: Aero Graphene in Modern Aircraft & UAV.
Recent Innov. Mechatron. 9 (1), 1-5, 2022.
kiadói változat: 3
2022Kapusi, T., Erdei, T., Husi, G., Hajdu, A.: Application of Deep Learning in the Deployment of an Industrial SCARA Machine for Real-Time Object Detection.
Robotics. 11 (4), 1-20, 2022.
Folyóirat-mutatók:
Q2 Artificial Intelligence
Q1 Control and Optimization
Q1 Mechanical Engineering
kiadói változat: 88
2022Babangida, A., Husi, G., Szemes, P.: Bond Graph Modeling, Simulation, and Control of Permanent Magnet Linear Synchronous Motor: PMLSM Motor Based EVs Applications.
Recent Innov. Mechatron. 9 (1), 1-9, 2022.
Kiadói változat: 7
2022Csernátony, Z., Manó, S., Tiba, Z., Husi, G., Jónás, Z., Váradi, T., Csámer, L., Kovács, Á.: Critical analysis of in vitro stability testing of spinal implants and proposal for standardization.
Expert Rev. Med. Devices. 19 (3), 281-286, 2022.
Folyóirat-mutatók:
Q2 Biomedical Engineering
Q2 Medicine (miscellaneous)
Q2 Surgery
kiadói változat: 32
2022Erdei, T., Krakó, R., Husi, G.: Design of a digital twin training centre for an industrial robot arm.
Appl. Sci.-Basel. 12 (17), 1-25, 2022.
Folyóirat-mutatók:
Q3 Computer Science Applications
Q2 Engineering (miscellaneous)
Q2 Fluid Flow and Transfer Processes
Q2 Instrumentation
Q2 Materials Science (miscellaneous)
Q3 Process Chemistry and Technology
Kiadói változat - Hozzáférhető: 59
2022Bodzás, S., Tiba, Z., Ailer, P., Husi, G.: Redesign of a Volkswagen Crafter vehicle to a hybrid vehicle having e-motor and diesel engine.
IOP Conf. Ser. Mater. Sci. Eng. 1237 (1), 1-6, 2022.
kiadói változat: 5
2022Almusawi, H., Mohammed, A., Khaled, A., Korondi, P., Husi, G.: Self-Driving robotic car utilizing image processing and machine learning.
IOP Conf. Ser. Mater. Sci. Eng. 1256 1-13, 2022.
kiadói változat: 11
2021Korsoveczki, G., Bencsik, B., Husi, G.: CPVC-könyökidomok optikai ellenőrzése és a gyártási folyamat hibadiagnosztikája.
Műsz. tud. közl. = PTS. 15 56-60, 2021.
kiadói változat: 22
2021Almusawi, H., Husi, G.: Design and Development of Continuous Passive Motion (CPM) for Fingers and Wrist Grounded-Exoskeleton Rehabilitation System.
Appl. Sci.-Basel. 11 (2), 1-23, 2021.
Folyóirat-mutatók:
Q3 Computer Science Applications
Q2 Engineering (miscellaneous)
Q2 Fluid Flow and Transfer Processes
Q2 Instrumentation
Q2 Materials Science (miscellaneous)
Q2 Process Chemistry and Technology
kiadói változat: 87
2021Török, M., Erdei, T., Tóth, S., Husi, G.: Designing and building a remote-controlled 3D printed prototype robot arm implant.
IOP Conf. Ser. Mater. Sci. Eng. 1169 (1), 1-6, 2021.
kiadói változat: 15
2021Dezső, D., Győri, G., Husi, G.: Development of ECG measurement and processing system in LabVIEW environment.
Int. rev. appl. sci. eng. 12 (1), 76-85, 2021.
Folyóirat-mutatók:
Q3 Engineering (miscellaneous)
Q4 Environmental Engineering
Q4 Information Systems
Q4 Management Science and Operations Research
Q4 Materials Science (miscellaneous)
kiadói változat: 44
2021Saadah, A., Husi, G.: Hat szabadságfokos robotkarprototípus-modellezés Matlab által.
Műsz. tud. közl. = PTS. 15 94-98, 2021.
kiadói változat: 21
2021Saadah, A., Husi, G.: Kuka KR5 arc Welding Industrial Manipulator Workspace Modelling Based on Kinematics Study.
IOP Conf. Ser. Mater. Sci. Eng. 1169 1-7, 2021.
kiadói változat: 41
2021Józsa, R., Kapusi, T., Tóth, S., Erdei, T., Husi, G.: MP-9S Industrial Manipulator Handling and Scrapping Tasks in Industrial Environments.
Műsz. tud. közl. = PTS. 15 (1), 38-42, 2021.
kiadói változat: 33
2021Józsa, R., Kapusi, T., Tóth, S., Erdei, T., Husi, G.: MP-9S ipari manipulátor anyagmozgatási és selejtezési feladatok ellátása ipari környezetben.
Műsz. tud. közl. = PTS. 15 38-42, 2021.
kiadói változat: 21
2021Korsoveczki, G., Bencsik, B., Husi, G.: Optical Inspection of CPVC Fitting Elbows and Fault Diagnosis of the Production Process.
Műsz. tud. közl. = PTS. 15 (1), 56-60, 2021.
kiadói változat: 25
2021Saadah, A., Husi, G.: Six DOF Robotic Arm Prototype Modelling By Matlab.
Műsz. tud. közl. = PTS. 15 (1), 94-98, 2021.
kiadói változat: 29
2021Korsoveczki, G., Husi, G.: The model of a permanent magnet DC motor in time domain and frequency domain based on Bond Graph modelling and design of position control using PID controller.
IOP Conf. Ser. Mater. Sci. Eng. 1169 1-5, 2021.
kiadói változat: 32
2020Molnár, Z., Husi, G.: Bond-Graph model based stepper motor output characteristics simulation implemented in LabVIEW environment.
Recent Innov. Mechatron. 7 (1), 2020.
kiadói változat: 56
2020Saadah, A., Almusawi, H., Husi, G.: Computing The Kinematics Study of a 6 DOF Industrial Manipulator Prototype by Matlab.
Recent Innov. Mechatron. 7 (1), 1-5, 2020.
kiadói változat: 39
2020Korsoveczki, G., Husi, G.: Optical inspection of mounted printed circuit board using National Instruments software.
Recent Innov. Mechatron. 7 (1), 1-6, 2020.
kiadói változat: 35
2020Chauhan, R., Husi, G., Erdei, T.: ROS OS based environment mapping of Cyber Physical System Lab by Depth sensor.
Recent Innov. Mechatron. 7 (1), 1-6, 2020.
kiadói változat: 44
2020Erdei, T., Husi, G.: Singularity measurement in the Cyber-physical and intelligent robot systems laboratory.
Int. Rev. Appl. Sci. Eng. 11 (2), 82-87, 2020.
Folyóirat-mutatók:
Q3 Engineering (miscellaneous)
Q4 Environmental Engineering
Q4 Information Systems
Q4 Management Science and Operations Research
Q4 Materials Science (miscellaneous)
kiadói változat: 38
2019Varga, R., Erdei, T., Husi, G.: CodeSys based HMI design and sensor upgrades for a PLC and Atmega2560 controlled industrial conveyor.
Anale. Univ. Oradea. Fasc. Manag. Techn. Engin. 18 (28) (1), 250-255, 2019.
Kiadói változat: 75
2019Varga, R., Erdei, T., Husi, G.: CodeSys based HMI design and sensor upgrades for a PLC and Atmega2560 controlled industrial conveyor.
IOP Conf. Ser. Mater. Sci. Eng. 5682019.
kiadói változat: 71
2019Pajkos, T., Erdei, T., Husi, G.: CodeSys modeling of an industrial cell, and linear drive control with PLC & ATmega2560 microcontrollers for testing and improvement purposes.
Anale. Univ. Oradea. Fasc. Manag. Techn. Engin. 18 (28) (1), 245-249, 2019.
Kiadói változat: 81
2019Pajkos, T., Erdei, T., Husi, G.: CodeSys modeling of an industrial cell, and linear drive control with PLC & ATmega2560 microcontrollers for testing and improvement purposes.
IOP Conf. Ser. Mater. Sci. Eng. 5682019.
kiadói változat: 191
2019Krucsó, L., Kapusi, T., Erdei, T., Husi, G.: Designing an ATmega328 microcontroller based gesture-controlled IoT UGV unit and creating a camera system using Linux distribution.
Recent Innov. Mechatron. 6 (1), 1-7, 2019.
kiadói változat: 13
2019Molnár, Z., Cascio, G., Husi, G., Szűcs, E.: Developing a real-time accuracy monitoring system for industrial robot arms based on lean principles.
Anale. Univ. Oradea. Fasc. Manag. Techn. Engin. 18 (28) (1), 277-281, 2019.
Kiadói változat: 67
2019Molnár, Z., Cascio, G., Szűcs, E., Husi, G.: Developing a real-time accuracy monitoring system for industrial robot arms based on lean principles.
IOP Conf. Ser. Mater. Sci. Eng. 5682019.
kiadói változat: 26
2019Füleki, Z., Erdei, T., Szántó, A., Szíki, G., Husi, G.: Development of an IoT based Smart meteorological station & horticultural irrigation system's controller using a Raspberry Pi Linux server.
Recent Innov. Mechatron. 6 (1), 1-6, 2019.
kiadói változat: 27
2019Afghan, S., Husi, G.: Modelling and Analysis of Energy Harvesting in Internet of Things (IoT): Characterization of a Thermal Energy Harvesting Circuit for IoT based Applications with LTC3108.
Energies. 12 (20), 1-13, 2019.
Folyóirat-mutatók:
Q2 Control and Optimization
Q2 Electrical and Electronic Engineering
Q2 Energy Engineering and Power Technology
Q2 Energy (miscellaneous)
Q2 Fuel Technology
Q2 Renewable Energy, Sustainability and the Environment
kiadói változat: 85
2019Alsabbagh, A., Nasser, A., Husi, G.: Python-Based Data Analysis Tool for a 6-DoF Industrial Robot.
Anale. Univ. Oradea. Fasc. Manag. Techn. Engin. 18 (28) (1), 411-418, 2019.
Kiadói változat: 73
2019Alsabbagh, A., Nasser, A., Husi, G.: Python-Based Data Analysis Tool for a 6-DoF Industrial Robot.
IOP Conf. Ser. Mater. Sci. Eng. 5682019.
kiadói változat: 63
2019Horváth, P., Erdei, T., Husi, G.: Restoration and PLC control of a material handling MP-9S industrial manipulator platform.
Anale. Univ. Oradea. Fasc. Manag. Techn. Engin. 18 (28) (1), 240-244, 2019.
Kiadói változat: 36
2019Horváth, P., Husi, G., Erdei, T.: Restoration and PLC control of a material handling MP-9S industrial manipulator platform.
IOP Conf. Ser. Mater. Sci. Eng. 5682019.
kiadói változat: 39
2019Hegyi, G., Erdei, T., Husi, G.: Restoration and PLC control of a robot cell compatible MP-11 industrial manipulator platform.
Anale. Univ. Oradea. Fasc. Manag. Techn. Engin. 18 (28) (1), 235-239, 2019.
Kiadói változat: 80
2019Hegyi, G., Husi, G., Erdei, T.: Restoration and PLC control of a robot cell compatible MP-11 industrial manipulator platform.
IOP Conf. Ser. Mater. Sci. Eng. 5682019.
kiadói változat: 54
2019Nasser, A., Alsabbagh, A., Husi, G.: The effect of changing training data on a fixed deep learning detection model.
Anale. Univ. Oradea. Fasc. Manag. Techn. Engin. 18 (28) (1), 362-372, 2019.
Kiadói változat: 86
2019Nasser, A., Alsabbagh, A., Husi, G.: The effect of changing training data on a fixed deep learning detection model.
IOP Conf. Ser. Mater. Sci. Eng. 5682019.
kiadói változat: 54
2018Erdei, T., Molnár, Z., Obinna, N., Husi, G.: A novel design of an augmented reality based navigation system & its industrial applications.
Acta IMEKO. 7 (1), 57-62, 2018.
Folyóirat-mutatók:
Q3 Electrical and Electronic Engineering
Q3 Instrumentation
Q3 Mechanical Engineering
kiadói változat: 93
2018Torma, D., Husi, G., Sarvajcz, K.: Autódiagnosztikai adatok feldolgozása NI DIAdem programmal.
RIIM. 5 (SI.), 1-7, 2018.
Kiadói változat: 81
2018Karadeniz, A., Alsabbagh, A., Husi, G.: Comparison between proportional, integral, derivative controller and fuzzy logic approaches on controlling quarter car suspension system.
MATEC Web Conf. 184 (Paper), [4], 2018.
kiadói változat: 129
2018Templom, T., Erdei, T., Husi, G.: Delta tripod robot FDM típusú 3D nyomtató tervezése Open-Source Arduino fejlesztőplatform felhasználásával.
RIIM. 5 (SI.), 1-6, 2018.
Kiadói változat: 120
2018Templom, T., Erdei, T., Shaw, E., Husi, G., Molnár, Z.: Designing a delta tripod robot based fused deposition modelling 3 dimensional printer using an open-source Arduino development platform.
MATEC Web Conf. 184 1-4, 2018.
kiadói változat: 22
2018Templom, T., Molnár, Z., Shaw, E., Husi, G., Erdei, T.: Designing a Delta Tripod Robot Based Fused Deposition Modelling 3 Dimensional Printer Using an Open-Source Arduino Development Platform.
Anale. Univ. Oradea = Fasc. Manag. Techn. Engin. 17 (27) (2), 89-92, 2018.
kiadói változat: 27
2018Dezső, D., Sarvajcz, K., Husi, G.: Drónok szabályzásainak vizsgálata képfeldolgozással.
RIIM. 5 (SI.), 1-6, 2018.
Kiadói változat: 60
2018Agonás, Á., Bánóczy, E., Husi, G.: Épületekben használandó mérőműszer megvalósítása Arduino mikrokontrollerrel.
RIIM. Különszám 1-7, 2018.
Kiadói változat: 55
2018Korsoveczki, G., Husi, G., Erdei, T.: FANUC M-1iA 0.5A válogató robot karbantartása, üzembe helyezése és iRVision alapú képfelismerés megvalósítása.
RIIM. 5 (Klnsz.), 1-7, 2018.
kiadói változat: 93
2018Balogh, I., Sarvajcz, K., Husi, G.: GPS adatok mérése és feldolgozása NI, LabVIEW szoftverrel.
RIIM. 5 (SI.), 1-7, 2018.
Kiadói változat: 60
2018Tyukodi, Z., Husi, G., Bánóczy, E.: Grafikus felület készítése épületek energiafogyasztásának szimulációs vizsgálatához.
RIIM. 5 (SI.), 1-7, 2018.
Kiadói változat: 77
2018Varga, V., Erdei, T., Husi, G.: KUKA KR5 ipari hegesztő robotkar megfogó rendszerének újratervezése 3D nyomtató technológia felhasználásával Arduino segítségével.
RIIM. 5 (SI.), 1-7, 2018.
Kiadói változat: 119
2018Molnár, Z., Obinna, N., Husi, G., Erdei, T.: KUKA KR5 ipari robotkar szingularitásának vizsgálata.
RIIM. Különszám 1-5, 2018.
Kiadói változat: 116
2018Nagy, D., Husi, G., Szemes, P.: Omnidirekcionális robot megvalósítása, dinamikai és mozgásszabályozási tulajdonságainak mérése.
RIIM. Különszám 1-6, 2018.
Kiadói változat: 64
2018Nagy, Á., Tóth, J., Husi, G.: Pneumatikus megfogóval szerelt többtengelyes manipulátor irányítása PLC-vel.
RIIM. 5 (SI.), 1-5, 2018.
Kiadói változat: 76
2018Varga, V., Husi, G., Erdei, T.: Redesigning the gripping system of KUKA KR5 by utilizing 3 dimension printing technologies and Arduino.
MATEC Web of Conferences 184 1-6, 2018.
kiadói változat: 83
2018Varga, V., Erdei, T., Husi, G.: Redesigning The Gripping System Of Kuka Kr5 By Utilizing 3 Dimension Printing Technologies and Arduino.
Anale. Univ. Oradea = Fasc. Manag. Techn. Engin. 17 (27) (2), 93-98, 2018.
kiadói változat: 63
2018Szabó, A., Husi, G., Szemes, P.: Robosztus objektumfelismerés mobil robotokhoz, Kinect szenzor segítségével.
RIIM. 5 (SI.), 1-6, 2018.
Kiadói változat: 66
2018Korsoveczki, G., Husi, G., Erdei, T.: The maintenance, commissioning of FANUC M-1iA 0.5A type selecting robot and implementation of iRVision picture-recognizing procedure.
MATEC Web Conf. 184 1-6, 2018.
kiadói változat: 100
2018Korsoveczki, G., Husi, G., Erdei, T.: The Maintenance, Commissioning of FANUC M-1iA 0.5a Type Selecting Robot and Implementation of Irvision Picture-Recognizing Procedure.
Anale. Univ. Oradea = Fasc. Manag. Techn. Engin. 17 (27) (2), 69-74, 2018.
kiadói változat: 102
2017Costea, C., Gergely, E., Coroiu, L., Silaghi, H., Bara, A., Husi, G.: A Control Design Technique for Grinding Systems with Feedforward Undercompensation and Feedback Control.
SBEEF. 17 (1), 1-5, 2017.
Kiadói változat: 117
2017Molnár, Z., Erdei, T., Obinna, N., Husi, G.: A Novel Design of an Air-Cushion Vehicle and Its Implementation.
In: "Imt Oradea" - 2017: Proceedings of the Annual Seesion of Scientific Papers. Ed.: Calin Baban, Florin Sandu Blaga, Gavril Grebenisan, Alexandru-Viorel Pele, Mircea Teodor Pop, Alexandru Rus, Radu Catalin Tarca, University of Oradea Publishing House, Oradea, 187-190, 2017. ISBN: 9786061015375
Kiadói verzió: 102
2017Molnár, Z., Erdei, T., Obinna, N., Husi, G.: A Novel Design of an Air-Cushion Vehicle and Its Implementation.
Anale. Univ. Oradea = Fasc. Manag. Techn. Engin. 16 (26) (2), 105-108, 2017.
Kiadói változat: 92
2017Molnár, Z., Erdei, T., Obinna, N., Husi, G.: A novel design of an air-cushion vehicle and its implementation.
MATEC Web Conf. 126 (Paper), [4], 2017.
Kiadói változat: 91
2017Erdei, T., Molnár, Z., Obinna, N., Husi, G.: Cyber Physical Systems In Mechatronic Research Centre.
Anale. Univ. Oradea = Fasc. Manag. Techn. Engin. 16 (26) (2), 95-98, 2017.
Kiadói változat: 58
2017Erdei, T., Molnár, Z., Obinna, N., Husi, G.: Cyber physical systems in mechatronic research centre.
MATEC Web Conf. 126 (Paper), [4], 2017.
Kiadói változat: 99
2017Nagy, Z., Husi, G., Bánóczy, E.: Épületautomatizálási rendszer kiépítése Arduinoval és ESP8266 modullal.
RIIM. 4 (SI.), 1-7, 2017.
kiadói változat: 72
2017Szíki, G., Sarvajcz, K., Kiss, J., Gál, T., Szántó, A., Gábora, A., Husi, G.: Experimental investigation of a series wound dc motor for modeling purpose in electric vehicles and mechatronics systems.
Measurement. 109 111-118, 2017.
Folyóirat-mutatók:
Q2 Applied Mathematics
Q2 Condensed Matter Physics
Q1 Education
Q1 Electrical and Electronic Engineering
Q1 Instrumentation
Q2 Statistics and Probability
post-print: 195
2017Szabó, L., Husi, G., Tóth, J.: Ipari eszközökkel megvalósított automata elektropneumatikus rajzgép.
RIIM. 4 (SI.), 1-6, 2017.
kiadói változat: 71
2017Ács, V., Husi, G., Tóth, J.: NI MYDAQ eszközzel támogatott ipari szenzor vizsgáló állomás modellezése.
RIIM. 4 (Különszám), 1-5, 2017.
kiadói változat: 79
2017Sas, D., Kovendi, Z., Gergely, E., Husi, G., Coroiu, L.: Preliminaries in carbon 13C separation process by low temperature distillation.
J. Electr. Electron. Eng. 10 (1), 63-66, 2017.
Folyóirat-mutatók:
Q3 Electrical and Electronic Engineering
kiadói változat: 1
2017Molnár, Z., Husi, G.: Prototípus alkatrészek elkészítésére kifejlesztett CNC távvezérlése és távfelügyelete.
RIIM. 4 (Különszám), 2017.
kiadói változat: 75
2017Afghan, S., Almusawi, H., Husi, G.: Simulating the electrical characteristics of a photovoltaic cell based on a single-diode equivalent circuit model.
Anal. Univ. Oradea. Fasc. Ing. Manag. Technol. 26 (1), 91-96, 2017.
Kiadói változat: 241
2017Afghan, S., Almusawi, H., Husi, G.: Simulating the electrical characteristics of a photovoltaic cell based on a single-diode equivalent circuit model.
MATEC Web Conf. 126 1-6, 2017.
kiadói változat: 89
2016Liptai, T., Husi, G., Tóth, J.: Fúvós hangszer irányítása PROFINET ipari protokollon keresztül = Controlling a wind instrument with the help of PROFINET industrial protocol.
IJEMS. 1 (2), 123-128, 2016.
kiadói változat: 63
2016Costea, C., Silaghi, H., Matica, L., Gergely, E., Coroiu, L., Husi, G.: Graphical Interface Design for Water Pumping Process which Works with a Hydrophore.
SBEEF. 16 1-5, 2016.
kiadói változat: 93
2016Erdei, T., Molnár, Z., Husi, G.: Saját fejlesztésű vezérlőrendszer = Open-Source alapokon Self-developed controller system based on Open-Source applications.
IJEMS. 1 (2), 97-105, 2016.
kiadói változat: 108
2015Ovidiu, M., Ioan, M., Husi, G.: Advanced management and monitoring functions at the TMA 550AL manufacturing centre, used for ATR.
RIIM. 2 (1-2), 1-4, 2015.
kiadói változat: 50
2014Husi, G., Szász, C., Hashimoto, H., Niitsuma, M.: Building mechatronics simulation system.
Anale. Univ. Oradea = Fasc. Manag. Techn. Engin. 23 (13) (1), 307-310, 2014.
Kiadói változat: 100
2014Husi, G.: Communication Error Detection of Automative ECUs.
JCSCS. 7 (1), 35-38, 2014.
kiadói változat: 62
2014Szabó, L., Ruba, M., Szász, C., Chindris, V., Husi, G.: Fault Tolerant Bio-Inspired System Controlled Modular Switched Reluctance Machine.
Automatika. 55 (1), 53-63, 2014.
Folyóirat-mutatók:
Q3 Computer Science (miscellaneous)
Q4 Control and Systems Engineering
kiadói változat: 101
2014Szász, C., Husi, G.: LabView Software-based Building Supervising and Events Monitor System for Net Zero-energy Strategies Implementation.
RIIM. 1 (1), 1-7, 2014.
kiadói változat: 60
2014Tiba, Z., Kertész, J., Husi, G., Békési, Z.: Replacing the ICE by electric motor of the IVECO 150E Eurocargo Hard-Press Garbage Truck.
RIIM. 1 (1-2), 1-9, 2014.
kiadói változat: 68
2014Bartha, I., Vitéz, A., Husi, G.: Standard industrial inverter controlled drive chain for various type of EV.
RIIM. 1 (1-2.), 1-5, 2014.
kiadói változat: 59
2014Burca, M., Lucaciu, I., Moisa, R., Bereteu, L., Husi, G.: Technological Aspects of the Self-Shielding Tubular Wire Welding of Overlap Joining on Reinforcing Steel.
Anale. Univ. Oradea = Fasc. Manag. Techn. Engin. 23 (13) (3), 11-16, 2014.
Kiadói változat: 77
2014Mihaila, S., Pancu, R., Husi, G.: Theoretical and Experimental Research on the Improvement of the Cooling on Concave Semi Molds for Plastic Materials Processing.
Anale. Univ. Oradea = Fasc. Manag. Techn. Engin. 13 (2), 118-122, 2014.
Kiadói változat: 50
2013Husi, G., Dávid, E., Erdei, I., Szabó, G., Szemes, P.: Building automation simulation and research toolset for building mechatronics.
An. Oradea Univ. Fasc. Manag. Techn. Engineer. 22 (1), 105-110, 2013.
Kiadói változat: 135
2013Husi, G., Szemes, P., Tóth, N., Dudás, É.: Establishment of new research infrastructure at Department of electrical engineering and mechatronics, faculty of engineering, University of Debrecen.
An. Oradea Univ. Fasc. Manag. Techn. Engineer. 22 (1), 111-116, 2013.
Kiadói változat: 78
2011Bartha, I., Tóth, J., Husi, G.: Effect of a four-way rotating device to the electric energy production with solar cell.
An. Oradea Univ. Fasc. Manag. Techn. Engineer. 10 (20) (1), 3, 2011.
Nem hozzáférhető: 105
2011Husi, G.: How can a building get intelligent?.
An. Oradea Univ. Fasc. Manag. Techn. Engineer. 10 (20) (3), 2, 2011.
Kiadói változat: 61
2010Tiba, Z., Husi, G., Manó, S., Kiss, L., Jónás, Z., Nádházi, L., Csernátony, Z.: An easy to use device for lubricity examination.
Biomech. Hung. 2 (2), 27-30, 2010.
kiadói változat: 64
2010Tóth, J., Husi, G., Nagy, I.: Mechatronics mindstorming with Lego mindstorms NXT.
Carpathian J. Electr. Comp. Eng. 3 (1), 94-96, 2010.
kiadói változat: 126
2010Husi, G.: Production line construction for educational purposes.
An. Oradea Univ. Fasc. Manag. Techn. Engineer. 19 (9) (3), 1-7, 2010.
Kiadói változat: 28
2010Husi, G., Tóth, J., Darai, G.: Six legged autonomous robots for military and for civil use.
Carpathian J. Electr. Comp. Eng. 3 2010 40-42, 2010.
kiadói változat: 58
2010Husi, G., Diószeginé Zentay, É.: Steps of the execution of the Lean philosophy.
An. Oradea Univ. Fasc. Manag. Techn. Engineer. 19 (9) (2), 1-4, 2010.
Kiadói változat: 24
2009Yildirim, Ş., Husi, G.: Design of a modified linear quadratic regulator for vibration control of suspension systems.
Carpathian J. Electr. Comp. Eng. 2 (1), 7-12, 2009.
kiadói változat: 122
2009Husi, G., Tóth, J., Bartha, I.: Napelemek gyártástechnologiája a Yingli Green Energy társaságnál.
Debreceni műszaki közl. 8 (1-2), 135-146, 2009.
kiadói változat: 61
2009Kalmár, T., Yildirim, Ş., Eski, I., Husi, G., Kalmár, F.: Neural network predictor for thermal comfort conditions.
JCSCS. 2 (2), 97-102, 2009.
kiadói változat: 93
2009Gergely, E., Yildirim, Ş., Husi, G.: PLC programs design using signal interpreted petri networks.
JCSCS. 2 (1), 102-106, 2009.
kiadói változat: 61
2007Husi, G.: A Lean alapú termelés kialakításának lépései.
Debreceni műszaki közl. 6 (2), 59-73, 2007.
kiadói változat: 2015
2007Sipos, I., Husi, G.: Az emberi tényezők szerepének meghatározása a légijárművek karbantartásának minőségbiztosításában.
Debreceni műszaki közl. 6 (1), 45-57, 2007.
kiadói változat: 255
2005Husi, G.: Minőségfejlesztés a folyamatok javításával a Magyar Köztársaság Rendőrségénél.
Debreceni műszaki közl. 4 (2), 43-60, 2005.
kiadói változat: 24
2004Husi, G., Kiss Bacsó, L., Mikula, G.: A munkaértékfelmérés gyakorlata az általunk kidolgozott BAHUMI módszerrel.
Debreceni műszaki közl. 3 (2), 85-97, 2004.
kiadói változat: 18
2003Husi, G.: Rendőri munka értékelésének meghatározása a Hajdú-Bihar Megyei Rendőr-főkapitányságon.
Debreceni műszaki közl. 2 (1), 101-108, 2003.
kiadói változat: 111
2003Husi, G.: Rendőri munka értékének meghatározása a Hajdú-Bihar megyei rendőrfőkapitányságon.
Debreceni műszaki közl. 2 (1), 101-108, 2003.
kiadói változat: 54
2002Szűcs, E., Sutka, S., Baksa, L., Husi, G.: One way street for the Hajdú-Bihar County Police Department: TQM.
Debreceni műszaki közl. 1 (1), 125-131, 2002.
kiadói változat: 14
2000Husi, G.: Informatikai alapokon nyugvó Minőség Figyelési Rendszer kialakítása izzólámpák gyártásához.
Tud. közl. (DE. MFK). 25 119-124, 2000.
kiadói változat: 14